How to recover from bricked Windows version?

How to recover from bricked Windows version?

TechTablets Forums Cube Forums Cube iWork10 Ultimate How to recover from bricked Windows version?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #57755
    Vera
    Participant
    • Posts: 2

    Hey everybody,

     

    I’m pretty new. I recently got the Cube Iwork 10 Flagship. Im loving the tablet and I finally started to use Windows instead of Android. I was finally loving it, until it decided to update and now Im stuck in the following screen.

     

    Recovery

    Your Windows PC/Device needs to be repaired.

     

    I managed to get into the bios and I will have a bootable usb ready. I was wondering if Cube has any recovery images. I don’t want to damage the setup.

     

    Looking forward to your suggestions.

     

    Thanks

    Attachments:
    You must be logged in to view attached files.
    #57778
    Laura
    Participant
    • Posts: 296

    heh, there’s no easy way to get out of that mess. here are my suggestions, but you need to be quite tech savvy to do it

    • make a full backup of the system in its current situation. it may be recoverable and you may need to recover it if it’s a MAK activated unit or you’ll lose your windows “license”
    • create a usb drive of the windows 10 1607 iso, boot it and select repair, and make it try to repair boot problems
    • if the above fails, google on how to fix that problem. as i said it may be recoverable but you will need to make yourself a bootable WinPE usb drive
    • if all fails, you need to reflash the windows part of the tablet

    all the instructions to do the various steps are around in this forum, most in the big thread of howtos, some other scattered around. won’t be easy tho

    #57900
    Vera
    Participant
    • Posts: 2

    After an evening of trying my computer knowledge. I was able to recover windpows with the guide from http://techtablets.com/forum/topic/complete-guide-to-reinstall-cube-iwork10/

    I didnt have t T-version so, first I didnt have a touchscreen. Then I found the TCL-version:

    https://drive.google.com/file/d/0B55gm49vxGYHWWpGaEFOMXB4dFE/edit

     

    Thanks forums. Now I’m able to use Windows again 🙂

     

    https://drive.google.com/file/d/0B55gm49vxGYHWWpGaEFOMXB4dFE/edit

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar