TechTablets › Forums › Teclast Forums › X98 Plus Discussion › X98_PLUS_and_3G_android_5.1_mirek190_v3.0 rom
Tagged: x98plus windows only
- This topic has 372 replies, 104 voices, and was last updated 7 years, 3 months ago by Anonymous.
-
AuthorPosts
-
April 19, 2016 at 9:56 am #34236
yes – because I used the newest rom from the March as a base – still not corrected everything yet.
I have older device M5C8 and bluetooth works fine on your should be works without any problem.
Have you made clean install ?Ps – on system bar bluetooth devices are not visible – click more setting and then you will notice them.
April 19, 2016 at 10:07 am #34239Yes, I clean install.
The bluetooth runs, but does not find any device, keyboard, mouse, mobile android.
But he found a Windows PC.This means that work but can not find some devices.
See if others got the same problem.
April 19, 2016 at 10:11 am #34240I tested with bluetooth speakers and smartwatch – for me is ok .
April 19, 2016 at 11:00 am #34247I have make a dirty install and Bluetooth connections are is ok.
April 19, 2016 at 11:04 am #34250Bluetooth is working okay for me, found and paired with notebook and mobile phone. Moved a few files around between them, so far all working.
April 19, 2016 at 11:56 am #34254I have made a new clean install. Bluetooth now works correctly.
Thanks to the work MirekApril 19, 2016 at 3:43 pm #34280Mirek, thanks for your great rom
but i’m not the only one complain that paradise bay game is freezing on boot and close, but working well on other X86 devices, working on my sister’s Teclast ! 🙁
can you please check it ?
https://play.google.com/store/apps/details?id=com.king.paradisebay
if you can fix the problem, expect paypal donation rewardApril 19, 2016 at 4:54 pm #34285Still takes 3-4 seconds to wake the device from sleep. Ran clean install. Is there any plans to fix this permanently?
Yes, was same before with 2.1 I have tested Clean and dirty installation multiple times.
April 19, 2016 at 5:23 pm #34292AnonymousInactive- Posts: 38
Dirty flashed on A5C8. Sadly SD still not working in Windows, error 10 as soon as SD card is inserted. Also not working in Android, card is seen and does the checking for errors process then says it is safe to remove. Mount command from settings also produces safe to remove message then “unfortunately settings has stopped”. Don’t know if you can do anything with the SD problem but thanks for trying. Otherwise all good. Thanks Mirek.
April 19, 2016 at 5:31 pm #34293Is there an exact timing needed to get the flash process running?
I put the device in DNX mode and plug it in the USB Hub of my flashing device then start the .batThe only thing I get is “waiting for device”
DNX Mode exits with no flash…
What am I doing wrong?
Best regards
April 19, 2016 at 5:34 pm #34294marcus, you need to boot into android first, then restart and boot into dnx mode. from windoes dnx mode is not working
April 19, 2016 at 5:56 pm #34299Ahhhh, that’s the thing I was doing wrong.
And about the timing when to plug in?April 19, 2016 at 6:09 pm #34300the timing doesn’t matter, it will stay in DNX mode for a looong time.
it seems location service is not working in 3.0 (was also mentioned on xda)
April 19, 2016 at 6:24 pm #34301Ok, thanks a lot, will give it a try when I am at home…
I just saw at my previous attempts that it’s going to boot selection screen after displaying about 10 seconds the yellow text
April 19, 2016 at 6:40 pm #34306Is there an exact timing needed to get the flash process running? I put the device in DNX mode and plug it in the USB Hub of my flashing device then start the .bat The only thing I get is “waiting for device” DNX Mode exits with no flash… What am I doing wrong? Best regards
dont use HUB for flashing, not recommanded
-
AuthorPosts
- You must be logged in to reply to this topic.