TechTablets › Forums › Teclast Forums › Core M Tablets (X1,X2 and Teclast X3) › X2Pro › Reply To: X2Pro
In short – I used 0.4mm copper plate between CPU crystal and copper CPU socket with Colaboratory Liquid Metal pro thermo interface applied to contact crystal-copper plate and plate-socket. I covered CPU contact pins with anti conductive lacquer to prevent surprises from liquid metal. Than, I removed aluminium sticker from tablet cover and connected all silver conductive stickers in therms of electronic conductivity. I used thermo adhesive artctic silver to stick copper plate 0.2mm on tablet cover and than two copper plates 0.4 and 1mm on top of it to provide contact socket-tablet cover(arctic mx4 is between socket and cover).And I placed copper plate 0.4mm in the pit on CPU socket too.Nothing very hard but still a lot of work.
