A5C8 Touch screen of.

[linda]

Problem: Touch is off on half of the touch screen and it has rendered the tablet unusable．

I deleted Android partition and installed windows 10.  Everything went fine until I moved the wrong touch.gt file to the inf folder.  The .gt file was for a different x98 plus table.  Now half of the screen does not register touch properly, touch screen is off.

I installed the drivers using Double Driver.  I also tried installing the HID touch driver manually, neither worked.

I tried deleting the HID touch drivers and let windows update installed it, it didn’t work either.

I tried windows reset and install driver with double driver and same problem.

I also tried another fresh windows 10 install and same problem.  Half of the screen does not register touch precisely.

Does anybody know a fix for my touch screen problem?

Thanks

 

 

 

[eGuru]

linda wrote:

Problem: Touch is off on half of the touch screen and it has rendered the tablet unusable．

It is not likely a software issue.

Open it up and check if the flat cable from the digitizer is properly inserted.

You could try to remove/re-insert into the connector.

Be careful with how you open and close the connector latch – they are pretty easily broken.

 

[linda]

I just opened the tablet and checked all the flat cables.  They are all snug.

Also when Ｉ　ｆｉｒｓｔ　ｔｒｉｅｄ　ｔｏ　ｉｎｓｔａｌｌ　ｗｉｎｄｏｗｓ，　ｔｏｕｃｈ　ｓｃｒｅｅｎ　ｄｏｅｓ　ｎｏｔ　ｗｏｒｋ　ｄｕｒｉｎｇ　ｉｎｓｔａｌｌａｔｉｏｎ．　　Ｈｏｗｅｖｅｒ　ａｆｔｅｒ　Ｉ　ｉｎｓｔａｌｌｅｄ　ａｌｌ　ｔｈｅ　ｄｒｉｖｅｒｓ，　Ｉ　ａｔｔｅｍｐｔｅｄ　ａｎｏｔｈｅｒ　ｆｒｅｓｈ　ｗｉｎｄｏｗｓ　ｉｎｓｔａｌｌ．　　Ｔｈｅ　ｏｎｌｙ　ｄｉｆｆｅｒｅｎｔ　ｉｓ　ｔｈａｔ　ｔｈｅ　ｔｏｕｃｈ　ｗｏｒｋ　ｔｈｉｓ　ｔｉｍｅ　ｗｈｉｌｅ　installing　ｗｉｎｄｏｗｓａｎｄ　ｉｔｓ　ｎｏｔ　ａｃｃｕｒａｔｅ．

Ａｎｙ　though　ａｂｏｕｔ　ｗｈａｔ　ｍｉｇｈｔ　ｈａｖｅ　ｈａｐｐｅｎｅｄ．

Ｉ　ｃａｎ　ｕｓｅ　ｔｈｅ　ｔａｂｌｅｔ　ｗｉｔｈ　ａ　ｍｏｕｓｅ　ａｎｄ　ｈａｖｅ　installed　ｔｈｅ　ｌａｔｅｓｔ　ｂｉｏｓ

Ｗｅｉｒｄ，　ｔｈｅ　ｔｅｘｔ　ｃｈａｎｇｅ　ａｌｌ　ｓｐａｃｅｄ　ｆａｒ　ａｐａｒｔ．．．．．．

[linda]

Ｉ　ｔｈｉｎｋ　Ｉ　ｂｒｉｃｋｅｄ　ｔｈｅ　ｔａｂｌｅｔ．　ａｆｔｅｒ　ｐｕｔｔｉｎｇ　ｔａｂｌｅｔ　ｂａｃｋ　ｉｎｔｏ　ｉｔｓ　ｃａｓｉｎｇ，　ｉｔ　ｎｏｗ　ｗｏｕｎ＇ｔ　ｔｕｒｎ　ｏｎ　ａｎｙｍｏｒｅ．　Ｐｌｅａｓｅ　ｈｅｌｐ

[eGuru]

Linda, sorry that the result of opening your tablet is that it may now be bricked.

When I responded to your post, I only saw the first line of your post (seriously – the rest was not showing) otherwise I would not have advised to open it up.

You say it isn’t powering up now. Do you think the plastic button assembly for ON/OFF  and Vol up/dn is inserted properly?

[linda]

don’t worry, its fine.

The buttons are inserted properly.  The tablet won’t turn on however it feels warm to the touch.  I tried holding the power button think it was just the LCD screen broke but the tablet remains warm.  It was low on battery so it soon cooled down.  I tried turning it on again but it didn’t.  Not sure if you know what I mean.

 

[eGuru]

Did you pull out the ribbon cable from its connector or just look to see if it was properly seated?

[Author]

Posts