OTG hub or adapter that works with the X98 Plus

[Nicola]

Rohan Lorange wrote:

Apparently it is possible http://pinoutsguide.com/PortableDevices/usb_otg_pinout.shtml You need to put a certain type of resistor between the ID connection instead of the standard gnd I’ll post if I have success

 

This is what ACASIS H027 does ( https://www.amazon.com/Acasis-H027-Charging-Simultaneous-Transmisson/dp/B00SZNT0ZU )

 

But it is not working on X98 Plus\X80 Plus.

 

 

[Chris]

Thanks to this forum,and this topic I finaly solved the charge problem.

For who has a Ikea shop nearbye the usb charger they have is awsome.

http://www.ikea.com/us/en/catalog/products/10291881/

 

My teclast charger was charging 411 milli amperes  the Ikea one 1125 milli amperes almost trippeled the charge speed,this one is powering perfectly and due to the test even better as what  Ikea says.

I used the original cable from teclast but a better one is on the way.

There is a test and I will post it here also.

http://lygte-info.dk/review/USBpower%20Ikea%20Koppla%20UK.html

Cheers Chris

[Author]

Posts