Teclast x98 Pro Dual Bios version

[Samppa]

It´s quite intresting Bios what i have now. 🙂 Bad thing is that i don´t really wanna mess up anything there cos i don´t sure know all options. I tried to look wi-fi options, but there isn´t any. Wifi speed is good near my router, but about 10m away, speed is 0.1-0.2 Mb/s. Same thing in Android and Windows. I think antenna isn´t properly installed???

Everything else is working quite well, no crashes this far.

Is there anyway to copy my bios? I was thinking if somebody wanna play with options.

[hevitikku]

Well if you have a eeprom programmer you can read the eeprom. What type of options do you have in CPU configuration? Any wifi options in PCI subsystem settings?

[Joker2010]

Hello, Samppa!

Can you unload the BIOS 1.09 from Tablet to File and put it here in the Forum?

Thank you!

[Iñigo Martinez Lasala]

I have a K6 version and mine is 1.14, if I remember…

[Bengun]

Who have BIOS v.1.09 or other version with unlocked all menu.
Please dump bios to file and shared BIOS.BIN file,
or attach to this topic.
Thnx.

dump bios utility https://yadi.sk/d/R0tmInbhr2HSz

UPD.

Iñigo Martinez Lasala wrote:

I have a K6 version and mine is 1.14, if I remember…

Can You dump BIOS 1.14

Attachments:

You must be logged in to view attached files.

[timothy putnam]

I need the bios for the k9C6 also tablet is dead

[Bengun]

Teclast X98 PRO K9C6 BIOS v.1.62 and v.3.01

Also You can use CH341A programmator upgrade/flash BIOS for unbrick tablet.

Attachments:

You must be logged in to view attached files.

[hammondb4]

@Bengun, I have an X98 PRO K9C6 with 1.62 bios. I can’t find any info about 3.01 bios.

Is it worth to update? Any differences in performance? New GPu firmware?

Thanks.

Bengun wrote:

Teclast X98 PRO K9C6 BIOS v.1.62 and v.3.01 Also You can use CH341A programmator upgrade/flash BIOS for unbrick tablet.

[Bengun]

Im flash 3.01 bios and its working, but I dont know whats new.
Windows loading and worked more quickly.
Backup installed bios and you can return to the previous bios, at any time.

[BoORD_L]

3.01 doesn’t work for me.

I’ve got uefi error on android boot.

1.62 works well

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9

[bubu]

Samppa wrote:

It´s quite intresting Bios what i have now. Bad thing is that i don´t really wanna mess up anything there cos i don´t sure know all options. I tried to look wi-fi options, but there isn´t any. Wifi speed is good near my router, but about 10m away, speed is 0.1-0.2 Mb/s. Same thing in Android and Windows. I think antenna isn´t properly installed??? Everything else is working quite well, no crashes this far. Is there anyway to copy my bios? I was thinking if somebody wanna play with options.

Hello @Samppa, can you make a copy of bios 1.09 and upload it to the forum.

Thx .

Bengun wrote:

Who have BIOS v.1.09 or other version with unlocked all menu. Please dump bios to file and shared BIOS.BIN file, or attach to this topic. Thnx. dump bios utility https://yadi.sk/d/R0tmInbhr2HSz UPD.

Iñigo Martinez Lasala wrote:

I have a K6 version and mine is 1.14, if I remember…

Can You dump BIOS 1.14

[BoORD_L]

I’ve fallenback from bios 1.62 to 1.13 because it was draining too much my battery.

anyone else can confirm?

What I've used and what I've got:
TECLAST X98 AIR 3G, TECLAST X98 AIR II, TECLAST X98 PRO,CHUWI HI8, CHUWI HI12, CUBE I9

[Bengun]

BIOS v.1.62

in sleep mode <=6%  battery discharge per 24 hours.

Windows + Crome + Wifi + Saving mode from 100%  about 8h on battery.

[Mark]

Bengun wrote:

Who have BIOS v.1.09 or other version with unlocked all menu. Please dump bios to file and shared BIOS.BIN file, or attach to this topic. Thnx. dump bios utility https://yadi.sk/d/R0tmInbhr2HSz UPD.

Iñigo Martinez Lasala wrote:

I have a K6 version and mine is 1.14, if I remember…

Can You dump BIOS 1.14

@Bengun, Thank you very much for this program.
Long sought fptw.exe (DUMP_BIOS.zip) that will work, and I could not find!

And 100% success! Bingo!

[boy1234]

hi,

what procedure should I use for flashing?

thanks

 

[Author]

Posts