Tool for Bios update_ K9c3_ afuwin

Tool for Bios update_ K9c3_ afuwin

TechTablets › Forums › Teclast Forums › X98 Pro Forum › Tool for Bios update_ K9c3_ afuwin

Viewing 12 posts - 31 through 42 (of 42 total)
1 2 3
  • Author
    Posts
  • December 28, 2015 at 6:47 pm #20225
    Dominik
    Participant
    • Posts: 20

    Witam. Trochę osób z Polski i Litwy sobie sprowadziło ten tablet 🙂
    Did You manage to install full android and windows?

    December 28, 2015 at 7:48 pm #20239
    Milosz
    Participant
    • Posts: 76

    Panowie ja z Wrocka…POZDRO

    But back to subject…My tab was connected past last 4h to charger with no results…stil can’t get to DNX mode…(red empty battery and black screen0 when i connect to pc-usb same teclast logo after that green battery charging logo after that black screen. Any  button combination is not  working…. Anyway battery before flash was aprox 55% after that 0% ??? this davice killing me…any idea guys? I add some screen shots

    Attachments:
    You must be logged in to view attached files.
    December 28, 2015 at 9:03 pm #20255
    Dominik
    Participant
    • Posts: 20

    1. Try to press power button for about 20 sec. if not
    2. Try to press power for 1-2 sec when teclast logo starts try to press power for 10-20sec.

    It helped me to run after bad flash.

    December 29, 2015 at 11:53 am #20368
    Milosz
    Participant
    • Posts: 76
    1. Sorry Dominik I was wrong. I thought my tab charging past last 4h. My charger was disconnect 🙂 “Stupid Idiot :)” You was right …after charge tablet was able to boot in DXN FASTBOOT…but still was not recognised by PC.  I connected keyboard to USB hub and I get to BIOS. I set “android mode” and all should be fine. But me “stiupid idiot” after reboot I get dual boot screen choice and I click windows ( start loading but blue screen after that) and tablet death. Black screen constantly. No sings of life. But I know this is temporary (sick tab). This tablet is full of surprise, I never seen in my life such a crazy device. So I will try get back FASTBOOT mode when I back home after work …then what should I do to make right flash (flash phone tools )and choose ROM to flash? Mirek V1 (900mb) or V2 ( 500MB)????THX for sucrefice ur priceless time Dominik…I don’t know yet how I will pay U back 😉
    December 29, 2015 at 12:13 pm #20371
    Dominik
    Participant
    • Posts: 20
    Milosz wrote:
    1. Sorry Dominik I was wrong. I thought my tab charging past last 4h. My charger was disconnect :)<noscript>:)</noscript> “Stupid Idiot :)” You was right …after charge tablet was able to boot in DXN FASTBOOT…but still was not recognised by PC. I connected keyboard to USB hub and I get to BIOS. I set “android mode” and all should be fine. But me “stiupid idiot” after reboot I get dual boot screen choice and I click windows ( start loading but blue screen after that) and tablet death. Black screen constantly. No sings of life. But I know this is temporary (sick tab). This tablet is full of surprise, I never seen in my life such a crazy device. So I will try get back FASTBOOT mode when I back home after work …then what should I do to make right flash (flash phone tools )and choose ROM to flash? Mirek V1 (900mb) or V2 ( 500MB)????THX for sucrefice ur priceless time Dominik…I don’t know yet how I will pay U back ?

    I would start with oryginal teclast rom to recreate partitions (i think it is blank mode). I dont know how Mireks roms behave in PhoneFlashTool. Remember that you lost all windows data and partition. Try to run tablet with power button as i write few posts earlier. Best luck.

    December 30, 2015 at 10:15 am #20523
    valerima
    Participant
    • Posts: 76

    hi, guys, i can report I have succeeded and now have dual boot-android and windows.

    1. Miloszu- at first you have download Mirek’s rom 2.1 , but flash it Intel phone tool.
    2. Choose Mirec json and “blank”configuration. If your tablet is not identified then in bios choose enable “DNX”and Android – not Windows. then connect tablet via Usb to PC and press start flash …
    3. If you will succeed – you will see that windows disappeared. You have to reflash recovery image for K9c6.
    4. 4 files about 2 GB each are located in Download section. Format USB flash to fat 32 name WINPE and copy all files there. Unrar all 4 files in USB.
    5. Connect to tablet and start it. W10 installation will start.
    6. Powodzenia!!!

    valerima

    December 30, 2015 at 10:28 am #20536
    Dominik
    Participant
    • Posts: 20
    valerima wrote:

    hi, guys, i can report I have succeeded and now have dual boot-android and windows.

    1. Miloszu- at first you have download Mirek’s rom 2.1 , but flash it Intel phone tool.
    2. Choose Mirec json and “blank”configuration. If your tablet is not identified then in bios choose enable “DNX”and Android – not Windows. then connect tablet via Usb to PC and press start flash …
    3. If you will succeed – you will see that windows disappeared. You have to reflash recovery image for K9c6.
    4. 4 files about 2 GB each are located in Download section. Format USB flash to fat 32 name WINPE and copy all files there. Unrar all 4 files in USB.
    5. Connect to tablet and start it. W10 installation will start.
    6. Powodzenia!!!

    Congratulations. I think its best way to get dualboot K9C3. Hope Milosz power up his tablet.

    December 30, 2015 at 2:56 pm #20561
    Milosz
    Participant
    • Posts: 76

    I did exactly like U recomendet. 1st stock ROM after V2 by Mirek… All working great….now it’s time to install windows- how to start instalation to avoid damage android? At the moment I got only one icon of android in dual boot screen? THX for all advice-following ur guidance I’m almost there 😉

    December 30, 2015 at 2:59 pm #20562
    Milosz
    Participant
    • Posts: 76

    I did that yesterday at night and I didn’t see your advice(post) guys ….Big THX Polish Power 😉

     

    December 30, 2015 at 3:04 pm #20564
    Dominik
    Participant
    • Posts: 20
    Milosz wrote:

    I did exactly like U recomendet. 1st stock ROM after V2 by Mirek… All working great….now it’s time to install windows- how to start instalation to avoid damage android? At the moment I got only one icon of android in dual boot screen? THX for all advice-following ur guidance I’m almost there ?

    Download image WIN10 for K9C6 from techtablet site and just like valerima posts place on USB (FAT32, name WINPE) and restart tablet. Installation should start automaticly.

    December 30, 2015 at 6:55 pm #20598
    valerima
    Participant
    • Posts: 76

    windows 10 recovery for K9C6
    https://drive.google.com/file/d/0B2_tZ5uWPxifamZ2MUhEZTF4M00/view?usp=sharing
    https://drive.google.com/file/d/0B2_tZ5uWPxifa3huYlpjSXVkeVU/view?usp=sharing
    https://drive.google.com/file/d/0B2_tZ5uWPxifN2w2Ylgwc296RlU/view?usp=sharing
    https://drive.google.com/file/d/0B2_tZ5uWPxifbDFWWDVwY1E0Z0U/view?usp=sharing

    always remove chinese characters from the names of extracted folders to avoid problems and errors

    1. first backup your data from windows, since android instalation will wipe the original windows and everything will be deleted
    2. charge the tablet to full battery
    3. Now we will restore windows and make the tablet dualboot
    4. You will need at least 8GB flash drive, formatted to fat32 and during formating set the label to “WINPE”, otherwise it will not work
    5. Copy all archived files from win10 recovery to flash drive and extract inside usb.
    6. Connect the flash drive to the tablet and reboot, the tablet will detect it automatically and you will be able to choose windows from dualboot menu
    7. The whole windows installation process is automatic and it will not request any input from you, it will take some time, so make sure that the tablet is charged
    8. after the windows installation you will go through standard windows OOBE where you can setup user etc.. and then, after few restarts you will have almost fully working dualboot K9C3

    valerima

    January 3, 2016 at 1:30 pm #21074
    Milosz
    Participant
    • Posts: 76

    Valerima & Dominik i just want to say thank You and wish U guys happy new year. Thanks to U I got great working tablet…THX all the best guys

  • Author
    Posts
Viewing 12 posts - 31 through 42 (of 42 total)
1 2 3
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar