X98 Plus Tricks/Tips

[Chris]

I found a problem in the device Manager under “Memory Controller”

one of the “class controller of SD Memory” reports yellow mark and says
“The Device could not be started (Code10)
The E/A Device reports an E/A Error”

The EventLog says:
The Device SD\VID_27&OID_5048&PID_SD32G&REV_3.0\… could not migrate.

Is this also a driver problem or a real hardware defect?

Can somebody help me with this error messag?

Attachments:

You must be logged in to view attached files.

[Mathias]

i Have only two entries. Can you tell me what kind of emmc do you have and what kind of drivers ?

 

BR

Mathias

[Anonymous]

Mathias wrote:

mine CWBD3R samsung ….

Mine too, and I have these results

Seq Q32 Read: 125, Write: 36,54

4KQ32: Read 38.01, Write: 16.31

Seq: Read: 134.6, Write: 31.67

4K: Read: 16.16, Write: 12.11

[Samuel Hart]

The fail to start for SD Cards (error 10) is kinda a driver issue, but I’m yet to find a driver to solve it that doesn’t completely bugger up write speeds.

[Chris]

My Drive (emmc)  is HYNIX HCG8e with driver 10.0.10586.0 (21.06.2006)

Please tell me, if you found another driver to solve the Code 10 Device problem

[Gammlerlord]

Hi Chris,

My tablet uses also Hynix HCG8e memory.But my device is A5C8 and driver is 10.0.10586.0 (21.06.2006) too.But the Emmc write speed is Ok.

 

Attachments:

You must be logged in to view attached files.

[Gammlerlord]

Here you are a screenshot of device Manager.

Pls compare it with yours

Attachments:

You must be logged in to view attached files.

[Chris]

<!–more–> THX, but my Problem is not the emmc, it is the recognition of the SD Card Slot…

Because of the driver error in the SD Class Controller i don’t get a drive, like your

“Generic SA 16G SD”

[Anonymous]

Once again referring to the A5C8 Plus version. Do you think the issue regarding Windows not recognising the SD card over 32gb is really a driver issue ? I have no problem with cards up to and including 32gb but larger than that the card is not seen, therefore the driver is working. I have tried various brands,wasting money on buying 64gb cards I don’t really need for experimentation. I have tried NTFS rather than Fat 32 but it seems there is a 32gb cap somewhere causing the problem. I have not checked but is it possible that the bios is imposing that cap when in Windows ? I have emailed Teclast after sales customer service but this is my first Teclast product and I have no idea how good their support is, especially just getting back from a week off for Chinese New Year. Seems that there are enough users with this issue on the latest Plus that they should try and fix it quickly.

[Chris]

THx for this hint:

I found a very old 1GB mircoSD Card (formatted in FAT [not FAT32])
This Card is recognized from Win10!!!

I don’t know if it is because of the old FAT-format or the low Card-Size?!?

All my other 32GB Cards I tried are not recognized, no matter if I format them in FAT32, NTFS or ExFAT (The old FAT format is not possible to format in Windows with a 32GB Card)!

Are there any Ideas, what I can do to get my 32GB CArd to work???

[Anonymous]

I pulled the 32GB out of my Android phone as an experiment and the tablet Windows 10 sees it no problem. To format I use a free program on my PC, MiniTool Partition Wizard which allows for many formats that my Windows 7 (on my PC) built in formatting will not allow. FAT32 should be fine but I will pull my phone card again and check and provide properties here shortly.

[Anonymous]

The 32GB Card that works is a Verbatim HC Class 4 (!). Format confirmed as Fat 32. Can’t imagine that this tablet would prefer a class 4 card over a class 10 though.

[Gal]

Do you agree that this thread is a bit out of control?  In my opinion it should be closed as it became too long and addresses too many subject.  Information is getting lost (or just harder to find as it is not categorized by a thread Headline anymore).
The information here is amazing but it’s a shame it is not split to multiple threads.

[fload]

Gal wrote:

Do you agree that this thread is a bit out of control? In my opinion it should be closed as it became too long and addresses too many subject. Information is getting lost (or just harder to find as it is not categorized by a thread Headline anymore). The information here is amazing but it’s a shame it is not split to multiple threads.

I fully agree! It is very hard to follow.

[Gammlerlord]

Hi,

Yes we should close this thread and open a new specific thread just for SD-Card issue

[Author]

Posts