X98_PRO_android_5.1_mirek190_v6.0 rom

[J.B.]

Thanks !!

[B52]

thank you.

[mooms]

Karl0ss wrote:

Bit of a performance improvement over the last build, antutu score of 76458 on 2.01 and 77731 on 3.0

It’s the opposite on mine:

81637 on v1 (about the same on v2, didn’t take screenshot), 76538 on v3 (tested after fresh boot).

I dirty flashed V3 on v2.01, maybe it’s because of that ?

Attachments:

You must be logged in to view attached files.

[FC]

Dear guys,

do you confirm that flashing rom using the instructions on the first post leaves windows 10 untouched (no reinstallation of W10 needed)?

Thx in advance

Fabrizio

 

[mooms]

Yes.

[mirek]

mooms wrote:

Karl Hudgell wrote:

Bit of a performance improvement over the last build, antutu score of 76458 on 2.01 and 77731 on 3.0

It’s the opposite on mine:

81637 on v1 (about the same on v2, didn’t take screenshot), 76538 on v3 (tested after fresh boot).

I dirty flashed V3 on v2.01, maybe it’s because of that ?

On v1 was such score because cpu was works on full speed almost all the time ( heat problem ) – 60 % or more
Now on v3 cpu on full speed is only 1 -10 % and trying keep low frequencies.

Rom is made to run as fast as possible and save battery – no to get as much as possible in benchmarks …

If you want as high score as possible use performance scheduler …

[Ivo]

mirek wrote:

mooms wrote:

Karl Hudgell wrote:

Bit of a performance improvement over the last build, antutu score of 76458 on 2.01 and 77731 on 3.0

It’s the opposite on mine: 81637 on v1 (about the same on v2, didn’t take screenshot), 76538 on v3 (tested after fresh boot). I dirty flashed V3 on v2.01, maybe it’s because of that ?

On v1 was such score because cpu was works on full speed almost all the time ( heat problem ) – 60 % or more Now on v3 cpu on full speed is only 1 -10 % and trying keep low frequencies. Rom is made to run as fast as possible and save battery – no to get as much as possible in benchmarks … If you want as high score as possible use performance scheduler …

Hello,

As you might know, the X98 Plus Dualboot version will be released soon (in a week or so). Can the ROM be ported to that device too? The difference between the Pro and Plus is the CPU (Pro has Z8500, and Plus Z8300)

[adam]

I can report that I just flashed this mireks rom on x16pro as experiment and all went well. The problem is that the unit log to android to Lock screen and do not respond to any touches.I think changing resolution my help since the screen is a bet larger 11.6″.What file need to be edit to change res?

Also the Icons to switch between win/android not responding to touches.

Any suggestion to make this working?

[Pedro]

Mirek, I also would love to use your ROM on the X16 Power.

[Frank]

Thank you so much once again, Mirek. I wrote it before but your work alone has turned a costly but unusable piece of silicon into a great Android tablet. ‘Haven’t really been able to test-drive v3 much but the upgrade (“dirty” again from v2.01 to v3 – based on a clean v1 install) was hassle-free as expected and the table definitely feels “snappier” yet again.

My AntuTuTu score remains somewhere between 71K and 72K – I’ve never been able to get close to the ~80K as reported elsewhere but I am still having the “Turbo” turned off in BIOS; not sure that is still recommended?

In any case: I think another round of donations to Mirek is due! 🙂

-F

 

[CCY]

adam wrote:

I can report that I just flashed this mireks rom on x16pro as experiment and all went well. The problem is that the unit log to android to Lock screen and do not respond to any touches.I think changing resolution my help since the screen is a bet larger 11.6″.What file need to be edit to change res? Also the Icons to switch between win/android not responding to touches. Any suggestion to make this working?

I would like to know if the responsiveness of the touch screen improve after flashing mireks rom on X16 pro. Please advise.

[adam]

We have to ask MIREK to provide some touchscreen drivers or give as a some advice.

 

[Mohsin]

Thank You Mirek for another Update of this ROm

Can anybody tell me how to enable Battery percentage % in this Rom. I’m Unable to find. Thanks

 

[Evgeniy]

I use this   https://play.google.com/store/apps/details?id=de.kroegerama.android4batpercent

need root

[David Nurdin]

Mirk,

I flashed the 3.0 and now the build number on my tablet is V1.03_20150916, is this correct?

[Author]

Posts