Very Slow Write Speeds (dedicated thread)

Very Slow Write Speeds (dedicated thread)

TechTablets Forums Teclast Forums X98 Plus Discussion Very Slow Write Speeds (dedicated thread)

Viewing 15 posts - 1 through 15 (of 28 total)
  • Author
    Posts
  • #26115
    Alexandra
    Participant
    • Posts: 56

    Talk of slow write speeds in the X98 Plus Tips / Tricks topic kinda took over the thread, so here is a dedicated place to continue that discussion.

    It started with Mathias noticing that X98 Plus emmc write speeds were seemingly halved by the Nov 2015 Windows 10 update. Mathias’ numbers were about half of what Chris posted in his X98 Plus review. Another person suggested this was an issue before the Win10 update, but whenever it began, it seems widespread.

    Attached are my benchmarks on a fully updated X98 Plus (Samsung CWBD3R emmc), and yes, most of those write speeds are bad. The issue extends to the sdcard as well; that’s actually up to 6x slower than it should be.

    So far it seems we’re low on ideas for remedying this problem. Any thoughts?

    Attachments:
    You must be logged in to view attached files.
    #26120
    Gal
    Participant
    • Posts: 307

    Good idea with the new thread.

    I also heard that the windows update made a big hit on the drive speed.

    #26129
    Nicola
    Participant
    • Posts: 54

    I experienced the same slow speed on internal disk (A5C6 Windows-only, Samsung CWBD3R disk).

    Unfortunately I cannot say if speed where better before since I updated windows just 2 hours after receiving my tablet.

    Nicola

     

    #26159
    Anonymous
    Inactive
    • Posts: 124

    Same Samsung drive here.

    It was not the Nov. OS update that caused this…I tried it before updating last time.

    Two screenshots. The first time I ran the benchmark was the best, but still on the low side.

    #26182
    Gammlerlord
    Participant
    • Posts: 41

    My Emmc values seems to be OK but SD-Card is very slowly if I compare it Chris review values. My tablet is  A5C8 with latest WIN drivers. Hynix Emmc and Samsung 32GB class 10 SD-Card. May it makes sense to create a compatibility list of SD-Cards in combination with X98 plus.

    Kingston 16GB class4 works

    Samsung 32GB class10 works

    Trendscand Premium 300X class10 doesn’t work

     

     

    Attachments:
    You must be logged in to view attached files.
    #26194
    Anonymous
    Inactive
    • Posts: 38

    64GB Patriot class 10 no go

    64GB Silicon Power class 10 no go

    32GB Verbatim class 4 OK

    A5C8 version all Windows updates.

    #26197
    Anonymous
    Inactive
    • Posts: 124

    By the way, I wouldn’t call those speeds “very low”, just not up to the specifications of the 5.0 eMMC

    #26216
    Anonymous
    Inactive
    • Posts: 172

    I have the same drive as Chris has, Toshiba. Here are my results.
    So it seems there are 3 different drives in these things now. Toshiba, Samsung, Hynix

    #26240
    Anonymous
    Inactive
    • Posts: 124

    Great speeds MadMax! awesome 4k write there

    #26247
    Alexandra
    Participant
    • Posts: 56

    MadMax, wow, your Toshiba emmc scores are only slightly worse than Chris’ review emmc scores we’ve been using as a reference (attached for easy reference).

    Could it be that the Toshiba emmc is simply superior to Samsung/Hynix (at least in the X98 Plus)?

    And further, that some sdcards, like my Samsung Evo+ 128GB, just have poor X98 Plus compatibility resulting in (IMO) crippled write speeds?

    Attachments:
    You must be logged in to view attached files.
    #26347
    Anonymous
    Inactive
    • Posts: 38

    Just my 37 cents ( two bits US ) worth.

    Hynix HC8E

    #26457
    Chris
    Participant
    • Posts: 9

    Samsung 32GB Evo Class10.    NoGo

    noName 32GB Class10.             NoGo

    Very old noName  1GB Class4.  Works

    #26470
    Nicola
    Participant
    • Posts: 54

    I sent an email to Teclast aftersales support about the SD Card issue. They replied today. It looks their technicians are working on this issue!

    Attachments:
    You must be logged in to view attached files.
    #26482
    Anonymous
    Inactive
    • Posts: 38

    Thanks Nicola, I also emailed Teclast aftersales on February 13th but have not got a reply yet. Good news that I can stop wasting time trying to come up with a solution like many other people, bad news we need to wait for Teclast. Is it OK with you if I post a link of your message from Teclast to another forum where this is being discussed ?

    #26489
    Nicola
    Participant
    • Posts: 54

    Hi Neil, for me is ok.

Viewing 15 posts - 1 through 15 (of 28 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar