Reply To: F7 keeps freezing

[Andrea]

Hi to all
a week is already elapsed and my laptop Teclast F7  does not freeze anymore when connected to the power supply

I HAVE REINSTALLED WINDOWS 10 , I HAVE BLOCKED ANY WINDOWS UPDATE AND AFTER I HAVE USED A PROGRAM TO UPDATE DRIVER.

IF YOU WANT TO TRY YOU CAN FOLLOW THE ISTRUCTIONS AS FOLLOW. IF YOU ARE NOT AN EXPERT YOU HAVE TO GET SOMEONE  TO HELP YOU ,I AM NOT RESPONSABLE FOR ANY DAMAGES

To reinstall windows 10 home  you have to follow this procedure:

CREATE A USB INSTALLATION KEY

1)you have to download MediaCreationTool1809 from this site: https://www.microsoft.com/it-it/software-download/windows10
2)when the download is completed you have to insert a USB KEY ( 8gb minimum is required ) into your PC

3)launch Media Creation Toll and follow the instructions to create an USB BOOTABLE KEY with WINDOWS HOME.
-choose language
-edition WINDOWS HOME
-architecture 64bit
and click on NEXT
– choose USB FLASH UNIT
and click on NEXT
Now you MUST wait the procedure completes until the end when a string ” USB UNIT IS READY ” appear.

NOW YOUR USB UNIT IS READY

LET’S USE IT TO REINSTALL WINDOWS AS FOLLOW:

4) keep usb key inserted and reebot your laptop by holding down DELETE KEY.
5)your laptop start in BIOS mode.You have to select the usb key as first choice in the BOOT MENU.SAVE AND EXIT from configurazion and restart your PC.
6)Now WINDOWS home start to install.

7)When the procedure ask you if you have a serial number you have to select ” i have not serial ” and click on NEXT (the serial is into FIRMWARE in our TECLAST and is NOT NEEDED)

8) After you have to choose ” CUSTOM INSTALLATION : WINDOWS ONLY ”

9)when the procedure ask you where to install windows you have to select the PRIMARY PARTITION (110-120 GB)

DURING INSTALLATION DO NOT PERFORM ANY UPDATE WHEN REQUIRED !!!! DO NOT CONFIGURE ANY WIFI NETWORK !!!!!!

complete the installation by following the instruction on screen.

WHEN INSTALLATION IS COMPLETE and your PC START IN WINDOWS MODE,YOU HAVE TO BLOCK ANY WINDOWS UPDATE

to BLOCK ANY WINDOWS UPDATE YOU HAVE TO FOLLOWS THESE STEPS:

10) type  MICROSOFT FLAG KEY  + R KEY
11) in the txt box thaT appear type ”services.msc” and the OK.
12) In the new window that appear you have to double click on “WINDOWS UPDATE” row.
In the General folder you have to DISABLE the type of boot in the middle of the window.

NOW YOU HAVE TO UPDATE YOUR DRIVER BY DOWNLOADING DRIVERPACK 17.exe from this site: https://driverpack.io/it

13)connect your TECLAST to INTERNET and execute DRIVERPACK17.
14) SELECT ” SCAN THE SYSTEM ”
15) ACCEPT THE CONDITION IN THE TOP OF THE SCREEN
15)  CHOOSE “EXPERT MODE”
16) GO INTO SOFTWARE MENU’ AND DESELECT ALL PROGRAMS
17) GO INTO DRIVER MENU’ AND CLICK ON ” INSTALL ALL ”

WAIT THE PROCEDURE TO BE COMPLETED

AT THE END YOUR TECLAST WILL NEVER FREEZE ANYMORE.   ( KEEP ALWAYS WINDOWS UPDATE BLOCKED )