TechTablets › Forums › Jumper Discussion › EZBook series › EZbook 3 Pro – How to unlock the BIOS › Reply To: EZbook 3 Pro – How to unlock the BIOS
Giovanni wrote: You could just use an external programmer to flash the BIOS directoly to the flash chip thanks, but not very experienced with these things. Can you please point me to some page about this ? You need a programmer, like the CH341A (ebay) and then you need to solder some wires to te MB of the laptop. If you are not experienced just take the laptop to a good computer repair and give them the original BIOS to flash. I could also do it (for free) but it depends form where you live since the shipping costs could be too high
I’m from UK. Where are you from Giovanni? Not sure about postage, but to EU should be max £15 there and £15 back. Not sure how much would be in the repair shops. I don’t mind to send it to you, if you of course that kind and will flash it for me.
I’m from Italy. But first of all I would need to know which chip does your board have to see if I have a compatible programmer. Could you open the back lid, remove the heatsink and post a photo of the board?
Thanks Giovanni. Here is the MB:
Could you tell me the part number of those two chips?

EZbook 3 Pro BIOS modder - find my work here
If you want to tag me, my username is thegiolly

