1.84 Ghz ?

1.84 Ghz ?

TechTablets › Forums › Chuwi Forums › Chuwi Hi12 Forum › 1.84 Ghz ?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 8, 2016 at 1:18 pm #42908
    Justinkeyback
    Participant
    • Posts: 117

    Anyone?

    July 9, 2016 at 8:49 am #42987
    Justinkeyback
    Participant
    • Posts: 117

    Found it in BIOS 🙂

    July 9, 2016 at 9:16 am #42994
    koba
    Participant
    • Posts: 4

     

    ok, tell me please what you find and were? i got only 1.6ghz too.

    July 10, 2016 at 7:19 am #43056
    Justinkeyback
    Participant
    • Posts: 117

    I was wrong. It is not really full 1.84 but it is a setting to boost CPU in BIOS. What you got is RAM speed, slightly different, imo. But it gives no significant effect.

    July 10, 2016 at 9:46 am #43066
    Rinat
    Participant
    • Posts: 21

    It must be 1.6ghz with a full load of four cores, and 1.8ghz with a full load of only one core.

    July 10, 2016 at 5:50 pm #43087
    Marc
    Participant
    • Posts: 33

    I don’t know if Turbo Mode (the 1.84 GHz you’re looking for) is enabled in the default BIOS settings (with Power Technology on “Energy Efficient”.

    If you check Advanced – CPU configuration, the default Power Technology setting is “Energy Efficient”.

    If you change that to “Custom”, you see that Turbo Mode is “Enabled”, so then you should have it available.

    However, what the effect is on performance and power saving when changing this setting, and which P-state and C state settings are preferable, I haven’t got a clue (so perform at your own risk ‘;-)

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar