After Mod and change ssd, cube don't turn on

After Mod and change ssd, cube don't turn on

TechTablets › Forums › Cube Forums › Cube Mix Plus › After Mod and change ssd, cube don't turn on

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • November 4, 2017 at 3:54 pm #74394
    nicolas poupinet
    Participant
    • Posts: 213

    Did you made changes in boot manager?

    https://actiftech.com

    November 5, 2017 at 1:22 am #74410
    Algorithm
    Participant
    • Posts: 41

    Can you get into the bios?

    November 5, 2017 at 3:44 am #74411
    Pablo_2015
    Participant
    • Posts: 9

    I don’t change and in the BIOS.

    It don’t turn on, when prese the power botton, only turn on the red light for 4-5 seg.

    November 5, 2017 at 6:37 pm #74449
    nicolas poupinet
    Participant
    • Posts: 213

    Did you try to start the tablet while the back is out and the “mod” restored as default? Maybe it’s just a short circuit?

    https://actiftech.com

    November 5, 2017 at 9:15 pm #74451
    Chris G
    Keymaster
    • Posts: 2677

    Did you do the mod with the battery plugged in or out? Maybe something sorted out?

    Chris | Admin
    Please support us and help keep TechTablets online. Affiliate revenue is used to pay for the server, studio apartment (Techtablets HQ) and buy new tech to review. Without it, this site would be dead.
    Next up for review:
    Ordered and waiting for my: BMAX S15 & Teclast F6 Plus
    Currently testing: LG G8X & Redmi K30

    November 6, 2017 at 8:07 pm #74483
    Pablo_2015
    Participant
    • Posts: 9

    yes i left plugged in

    November 8, 2017 at 2:29 am #74557
    Pablo_2015
    Participant
    • Posts: 9

    I founded the solution or i beliave that. i don’t know whay but when i screw the four screws of the cpu shield to the maximum it don’t turn on but if i screw light it turn on

    November 8, 2017 at 5:47 pm #74575
    Algorithm
    Participant
    • Posts: 41

    Seems as if the copper shim is shorting one of the contacts when you screw the plate too tight.   Thankfully your machine is still working 🙂

    February 16, 2018 at 7:10 pm #79549
    Frantzisone
    Participant
    • Posts: 22

    What type of ssd did you put inside?

    April 5, 2018 at 11:03 am #141562
    Dhr. Jeep
    Participant
    • Posts: 62

    Any update here? Was it the copper shim touching the board? If yes, what size did you use?

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar