Android Stuck on Intel Inside Logo after format cache

[Beto RM]

I realized that the PC does not recognize the tablet. When I connect it through USB, the table start charging but nothing else. I restart it to see what happens, nothing, Just charge the battery.

Sorrry to bother you

[Beto RM]

Here again!!! Finally, I restar in recovery mode and the tablet connected usb to pc and the tablet was recognized. Unfortunately, the drivers did not find, Any idea where to get the drivers?

Again, many thanks

 

[Daniel]

Hi Beto RM!

Well….tons of things and different options

First of all…I promise…I´m not an expert compared to you! You got your tablet recognized by your computer…I DON´T! HAHAHA

Second…returning the device?….difficult to say. It is totally up to you…but in general, not too many people does it. Long time, not safe about the next device…but sometimes it works! I don´t know what to say.

Third…the drivers. This is my deadpoint. Valerima, G.Llark and others had shared their files, and even so, I cannot find the right drivers. Those that work for them, doesn´t work for me…so, it seems to be something with my computer, I thought! But then I tried with other 3 computers, differen OS (W7, W8.1 and W10) with 2 different cables and…nothing! So, it is not my computer.

I´m still waiting for an answer in other post…or here, but…this is difficult to find. So I cannot help you with that.

Be patient as Valerime advice me very well and…keep on working! Sorry for not givin you a better solution…but…I´m not an expert at all…HAHAHA…

By the way…WELCOME!

Daniel

[Beto RM]

Hi Daniel, I am sorry, I ‘ve forgotten to introduce myself. Thank you for your answer. I will keep working on it. I will wait for Pay Pal answer and I will decide what to do. If I get any solution to install drivers I let you know.

Thank you very much.

Alberto BetoRM

[Beto RM]

Hi Daniel, I’ve been reading G.Llark instructions again. He said “The tablet has to be in dnx fastboot mode and later in Android bootloader mode (two different modes!”. I don’t have any idea hoe to do it, do you? I can enter in dnx fasboot pressing volume (-) a power, but I really don’t understand how to pass to bootloader mode from there. Really I don’t understand the steps I should follow.

I am downloading drivers and some other stuff from other posts, I am going to try with them and let you know haw it was

Thank you again.

PS: I couldn’d connect tablet again to my PC

[Daniel]

I tried with more than 10 different drivers to get my tablet recognized by my computer, and nothing, so if you get it, please, share

About the fastboot is that mode with the yellow letters but boot loader is the mode that you get in when you follow the instructions and the tablet starts getting inside the software as he (G.Llark) explain step by step

The thing is that I cannot explain you any more detail because I cannot even start cause my tablet is not recognized and then i cannot initiate the process…so…not much to tell

Keep on working…

[G. Llark]

Guys,

afais your problem exists because your tablets is not recognized by Windows. This is a driver problem you have to solve. There are some hints in the forum, I can´t help you there as on Macs there aren´t any drivers to install to get fastboot to work.

But maybe, if you have your drivers installed, you can choose Android in the dual boot menu and afterwards push both volume buttons at the same time. This should bring you also to Android bootloader. It´s easy to know it because it´s the one with the green Andy. Try to use the fastboot devices command to check if your Windows recognize the tablet there. My Mac doesn´t do it, that´s why I always have to boot loader.efi from dnx fastboot mode.

You can also try to flash the new ROM from mirek if you get the flashtool in Windows to run, but this will delete your Android data. I hope you will get your Android up again.

[Beto RM]

Than you G. Lark.

Hi, I’m a mess. I have been trying a ton of options, double driver app, included. I have tested so many combinations of buttons that I don’t no what I did Hahahaha!!!

I also took a look on IntelAndroidDrvSetup1.5.0.exe, iSocUSB-Driver-Setup-1.2.0.exe y PhoneFlashTool 5.3.2.0 win32.exe, ( X98 Pro Android Flash Tool and Drivers). I has not dared to use them.

I’m going to take a break. All what I’ve got, is a splitting headache and worse yet, the battery doesn’t charge. My goodness!!!

I’ll prepare myself to be patient and we will see if any solution appears. I will refer any information.

Patience!!!

[Suchart]

Hi every good friends,

I faced a same problem, can not boot to android. My tablet is X98 Air 3G (Model C5J6 – 64GB)

My android os can not booted after I deleted windows recovery partition by EaseUS Partition Master Free Software, (It can not delete by Windows Partition softwares) I do not know why.

I try to flashing several times (several windows like Daniel) but not work , Windows not detect the tablet)

It is not good for the TecLast that the tecLast not create its USB software for linking with Windows, not by Intel soft that not work,

like ASUS Zenfone 6, I have)

I think this problem is a major mistake for the the tecLast,

I hope in recent period the TecLast would create this software to solve this problem.

Thank you very one for your help.

Suchart

Thailand, Bangkok

 

 

 

 

[Author]

Posts