Backlight Bleeding and Dead Pixels

Backlight Bleeding and Dead Pixels

TechTablets Forums Cube Forums Cube iWork10 Ultimate Backlight Bleeding and Dead Pixels

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #35023
    dlink377
    Participant
    • Posts: 114

    My tablet also has backlight bleeding on the bottom, although not as bad as yours. Doesn’t really matter to me, considering it is relatively cheap tablet. I haven’t yet noticed any dead pixel, only quite a bit of dust under the plastic screen (one of them is black with 2mm long). I already live with the flaws that comes with my tablet.

    #35057
    cube
    Participant
    • Posts: 6

    My tablet also has backlight bleeding on the bottom, although not as bad as yours. Doesn’t really matter to me, considering it is relatively cheap tablet. I haven’t yet noticed any dead pixel, only quite a bit of dust under the plastic screen (one of them is black with 2mm long). I already live with the flaws that comes with my tablet.

    As i said its the worst i ve encountered from all the chinese tablets i ve bought.
    It is really bothering because its on all 4 corners.

    Could you please post some pictures?
    Switch to 100% brightness, close the lights in the room and go use this video at full screen. https://www.youtube.com/watch?v=WexJRnud32U
    You will be able to notice any flaws then.
    And take some pictures with your camera so i can compare your panel with mine.

    Thank you in advance.

    #35109
    dlink377
    Participant
    • Posts: 114

    I’ve attached the picture. As you can see, the bleeding only occur on the bottom right. Definitely yours is so much worse than mine.

    Attachments:
    You must be logged in to view attached files.
    #35165
    cube
    Participant
    • Posts: 6

    I’ve attached the picture. As you can see, the bleeding only occur on the bottom right. Definitely yours is so much worse than mine.

    Thanks for the picture. Really appreciate it.

    Yeah its pretty bad on mine. I have contacted gearbest but no updates yet.
    I think i ll have to sent it back to them.
    We ll see.

    #35180
    Laura
    Participant
    • Posts: 296

    they look pretty similar tbh and mine is just like that… they’re just made like that and that’s it

    #65054
    FUCKTECHTABLET
    Participant
    • Posts: 176

    My 500$ Cube Mix Plus has backlight bleed area in the right edge 2cm long like an oval https://www.youtube.com/watch?v=yI3kB1x-NcA


    FUCK FUCKTECHTABLET

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar