Battery wont charge until 100%

[mixplus]

My mix plus wont charge up to 100%. 2 months ago, it will charge only until 91%. When I plugged in, it says charging, but the percentage will never go beyond that. Now, it only charge till 81%. I am using oem charger with 12V 3.5A rating. The report from batterybar pro, also showing the same, with 0% of battery wear. Perhaps anyone have solution for this, would you share with us here.

Thanks.

[Cloppy]

Sounds similar to my issue. Have you check the max/min voltages using a tool like BatteryInfoView? Should be around 6.0V at 1%, 8.4V at 100%

[mixplus]

Glad I am not the only having battery issue. My batteryinfoview was as attached while it is at the maximum percentage it can goes (82%). Wear level shows 100% while in batterybarpro showing 0%. I dont know much about the other numbers (voltages, etc). Would you mind explaining them for me?

Attachments:

You must be logged in to view attached files.

[Algorithm]

For anyone that is experiencing issues with maximum charge being less than 100%,  Would it be possible if you can recall whether or not there was any stage where you had left it on charge after it reached 100%.    I think in one of the XDA posts, it was mentioned that the battery charge max calibration value in bios differed from that of the actual battery capacity which caused issues when charging fully (and system thinking it had charged to a value that is more than the actual charge capacity

[Author]

Posts