BIOS Flash -> Black Screen (with Flasher)

BIOS Flash -> Black Screen (with Flasher)

TechTablets › Forums › Teclast Forums › X98 Pro Forum › BIOS Flash -> Black Screen (with Flasher)

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 31, 2015 at 4:25 pm #20731
    hevitikku
    Participant
    • Posts: 16

    Try holding the power button longer. If write and verify went ok it should work. Did you disconnect the battery while flashing?

    December 31, 2015 at 4:31 pm #20734
    Paulchen Panther
    Participant
    • Posts: 15

    no i dont disconnect the battery while flashing.

     

    ist this a must?

     

    Longer hold the power button gives no result.

     

    mfg

     

    December 31, 2015 at 4:36 pm #20736
    hevitikku
    Participant
    • Posts: 16

    Well probably not must but, when i was flashing mine with connected battery it failed, with disconnected it went ok so it might help.

    January 1, 2016 at 12:03 pm #20847
    Paulchen Panther
    Participant
    • Posts: 15

    Ok i will test.

     

     

    mfg

    January 6, 2016 at 12:51 am #21342
    Paulchen Panther
    Participant
    • Posts: 15

    so now i has flashed without battery, you can see in the video, but thats not working.

    can anyone help?

     

     

    January 6, 2016 at 11:04 am #21371
    hevitikku
    Participant
    • Posts: 16

    What is your tablet version K9C6 or K9C3? Have you measured the battery voltage? If the the battery level is too low (like 3v or something similar) the tablet won’t turn on, you need to wait for it to charge.

    January 6, 2016 at 12:23 pm #21375
    Paulchen Panther
    Participant
    • Posts: 15

    i have the k9c6.

     

    the battery is disconnected to the tablet while flashing. without verifying it wouldnt work, i had this one time before.

     

     

    mfg

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar