Camera problem after update w10

Camera problem after update w10

TechTablets Forums Teclast Forums X98 Air 3G / Air II – Single and dual boot Camera problem after update w10

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #23516
    Anonymous
    Inactive
    • Posts: 2

    Hi, my camera was not working correct.

    I used drivers from this site, updated drivers, camera started, but just the back camera, there is no front camera( at least no button to change it). Also its proved by skype, there is no chance to change the camera.

    At device manager, there is only 1thing under imaging camera devices…

    Thx for any idea

    #23556
    Kuba
    Participant
    • Posts: 17

    You didn’t even post which device, model and which ROM are you using..

    #23569
    Anonymous
    Inactive
    • Posts: 2

    OK, Teclast x98, model C9J6, official w10, updated from stock 8.1

    (Android Mirek’s rom v7, but that’s not important for w10 isn’t it?)

    #24392
    Alan
    Participant
    • Posts: 4

    I have the same problem.

    My tablet is a Teclast X98 Air 3G. I observed that the front camera does not work in Windows 10. In Android works perfectly. Any solution?

    My model is C5J6 and bios 2.02

    Regards.

    #27070
    Anonymous
    Inactive
    • Posts: 2

    I’m in a similar situation (x98 air 3g, C9J8) and have found out that the front camera gets disabled in android and windows because of bios 2.02.

    I’m hoping teclast will release a patch or something for it.

     

    I have an extra problem though, my back camera works fine in android, but is inverted on windows!

    #27180
    Alan
    Participant
    • Posts: 4

    I solved the problem with a Windows update

    #58374
    john
    Participant
    • Posts: 4

    l

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar