Can I charge the Hi12 using my powerbank?

Can I charge the Hi12 using my powerbank?

TechTablets › Forums › Chuwi Forums › Chuwi Hi12 Forum › Can I charge the Hi12 using my powerbank?

Tagged: ,

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 19, 2016 at 11:29 am #30014
    PiT
    Participant
    • Posts: 30

    Try it 😉 if that power bank has minimum 2A on any USB output it suppose to charge Your Hi12 without any problem.

    Yuandao N70|ColorFly 808 3G|Chuwi HI12 + (128GB microSD;GPS VK-172 MCDODO case:Stylus Pro Fine)

    March 19, 2016 at 1:47 pm #30044
    Frocee Mark
    Participant
    • Posts: 8

    There’s a lot of saying 3A, 2.5A, 2A charging. Did anyone use a usb meter to measure the actual current when charging?

    I had the X98 Pro, and the charging was never over 1A even thought it is rated for 2A charging.

    I’ve tried the original 2.5A charger, Samsung fast charger, and several other 2A chargers, it was never over 1A of current going in.

    March 20, 2016 at 10:31 am #30113
    Anonymous
    Inactive
    • Posts: 65
    Frocee Mark wrote:

    There’s a lot of saying 3A, 2.5A, 2A charging. Did anyone use a usb meter to measure the actual current when charging? I had the X98 Pro, and the charging was never over 1A even thought it is rated for 2A charging. I’ve tried the original 2.5A charger, Samsung fast charger, and several other 2A chargers, it was never over 1A of current going in.

    You should also make sure that you use a high quality USB cable(with little resistance). And be aware of the fact that USB meters create extra resistance in the cable, thus giving you less charge current.(because of a little voltage drop)

    March 20, 2016 at 2:36 pm #30136
    Frocee Mark
    Participant
    • Posts: 8

    Hi Loek, thanks for the reminder. I have tried all sorts of permutation with original charger and cable, and all the chargers and cables I have at home. Result is consistent: the charging never draw more than 1A.

    Please share your charging current rating with us, and the equipment you use to charge and measure the current. Thanks!

    March 20, 2016 at 6:27 pm #30163
    Anonymous
    Inactive
    • Posts: 65
    Frocee Mark wrote:

    Hi Loek, thanks for the reminder. I have tried all sorts of permutation with original charger and cable, and all the chargers and cables I have at home. Result is consistent: the charging never draw more than 1A. Please share your charging current rating with us, and the equipment you use to charge and measure the current. Thanks!

    If I get my Hi12 I will post results with chargers and several powerbanks. I have some generic 1A powerbanks, some randon 2A power banks and a real Xiaomi 10400mAh powerbank. (which should provide 2A at least)

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar