Charging problem (normal 12v charger)

Charging problem (normal 12v charger)

TechTablets Forums Cube Forums Cube Mix Plus Charging problem (normal 12v charger)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #79714
    Joe
    Participant
    • Posts: 5

    My cube mix plus has been having problems charging. The red charging indicator stays on when the charger is plugged in, but inside windows, the battery indicator constantly flashes between charging and battery-only mode. The total charge is constantly going down, and charging doesn’t seem to be occurring.

    Its hit 4%, and there doesn’t seem to be any charge going into it at all. Likely to be a warranty issue? And if people have had to claim warranty on these, have they had success despite having done the thermal mod? (My unit is probably about 4 months old now, thermal mod was done on day one.)

    Any assistance would be greatly appreciated!

    #79743
    Frantzisone
    Participant
    • Posts: 22

    Try to re install windows from settings it worked for me in two tablets.

    #98599
    Dhr. Jeep
    Participant
    • Posts: 62

    Also, I have read a lot of troubles with the 12V charger. Use the USB-C to charge, it’s worth the investment.
    uGreen is a good brand for stuff like that

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar