Chuwi Hi10 pro won't boot or charge (possibly bricked) Help…

[eric]

I have a chuwi hi10 pro Model CWI529 that won’t boot or charge. I was trying to use the volume keys to access the bios, and accidentally entered DNX FASTBOOT mode. I then did a hard reboot and the tablet died. ie; i plug it into charge, and i get no charge light and the tablet will NOT turn on at all. Did I corrupt hte BIOS, and if so, where cna i get the bios BIN Files? I have flashed Bioses before, so that’s the easy part for me. My tablet number is HI10 HQ64G42161203845 and on the motherboard there is a sticker that says: 6AS3R1C109D 4/64G

[eric]

bump

[JohnnyPeon]

It is possible that entering the DNX FASTBOOT mode has caused problems starting your Chuwi Hi10 Pro tablet. Although this does not necessarily mean that the BIOS is corrupted, it is crucial to make sure that the firmware is intact. To obtain the BIOS BIN files, you can consult the Chuwi website or forums dedicated to Chuwi users where other users https://tangierscasinoonline.com/ may have shared recovery files and solutions. Also be sure to check the version of your model to avoid any incompatibilities when flashing. If you already have experience flashing BIOS, this should make the process easier once you have recovered the necessary files.

[Author]

Posts