Chuwi HI10 Temperature Mod

Chuwi HI10 Temperature Mod

TechTablets Forums Chuwi Forums Chuwi Hi10 Discussion Chuwi HI10 Temperature Mod

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #33736
    Anonymous
    Inactive
    • Posts: 4

    Hi guys, this is my first post, I have do this mod to my HI10 and I have obteined around 10-12ºC less, working at full charge max 73-75ºC.
    I have to say that it can do better, but I’m not very pacience and I’ve done it with the materials that I’ve found at home :).

    Here you have some photos of the process.

    #33790
    Thijs S.
    Participant
    • Posts: 63

    nice!!

    #34208
    Damián
    Participant
    • Posts: 1

    Hi, looks nice!

    What materials did you use? thermal paste, a coin…

    It was hard to open?

    Thanks!

    #34212
    Antonio M.
    Participant
    • Posts: 2

    Better than a coin… You can use a 20x20mm copper plate, and I use too isolate tape to isolate the pcb to the thermal compound (is an electrical conductor) and the upper metal plate.

    Sorry for english, I’m from Spain.

    #34214
    Antonio M.
    Participant
    • Posts: 2

    And thermal pads from an old laptop to put it on the memories.

     

    #34305
    Anonymous
    Inactive
    • Posts: 4

    It´s easy to open, follow this video:

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar