Chuwi HI10 (With two normal sized USB ports.) won't turn on…

Chuwi HI10 (With two normal sized USB ports.) won't turn on…

TechTablets › Forums › Chuwi Forums › Chuwi Hi10 Discussion › Chuwi HI10 (With two normal sized USB ports.) won't turn on…

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 31, 2017 at 1:52 am #61258
    Joshua
    Participant
    • Posts: 5

    Hey guys. I just bought this thing and it won’t turn on no matter what I do. Here is what goes on…

    • Orange LED blinks when plugged into the charger,
    • Orange LED stays solid when plugged into a computer.
    • When holding the power button for 15 seconds the LED turns off while plugged in.
    • Holding power button when unplugged turns LED on for 3 seconds and then shuts off.

     

    Steps I tried doing:

    • Letting it charge with the supplied power plug for 3-4 hours.
    • Holding power + volume up buttons to turn it on.
    • Unplugged the battery, wait 30 seconds, replugged it in and tried to power it on.

     

    I have no clue what’s going on. Any help please would be really appreciated. Thank you.

    January 31, 2017 at 11:08 pm #61310
    Cri
    Participant
    • Posts: 26

    Change the charger, the supplied is really bad, had similar problems with chuwi hi10 plus changing the charger worked for me.

    February 3, 2017 at 4:10 am #61482
    Joshua
    Participant
    • Posts: 5
    Cri wrote:

    Change the charger, the supplied is really bad, had similar problems with chuwi hi10 plus changing the charger worked for me.

     

    I decided to open it up and found out what the issue was… There was 3 ribbon cables that was disconnected from the motherboard. It works great now.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar