Chuwi hi12 screen protector

Chuwi hi12 screen protector

TechTablets Forums Chuwi Forums Chuwi Hi12 Forum Chuwi hi12 screen protector

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #38194
    Richard Russell
    Participant
    • Posts: 84

    It is not glued, but the screen is not gorilla glass, so while you can remove the screen protector, I would advise you not to until you have a replacement screen protector waiting to get put on right afterwards

    #38854
    stroikersan
    Participant
    • Posts: 12

    Order one of these.  You will be happy.  Vey easy to apply and impossible to get bubbles because it is glass.  Make sure the screen is perfectly clean with the supplied alcohol wipe and tacky sticker supplied, lower the glass protector on slowly whilst holding by edges making sure at no time you touch the sticky side at all with your fingers and you will have a perfectly flat, bubble free, scratch protected screen.

    http://www.aliexpress.com/item/12Inch-9HGlass-Screen-Protectors-For-CHUWI-HI12-Tablet-PC-Tempered-Glass-Screen-Protector-Glass-film-H/32647159621.html

    #39203
    Henry Atcorner
    Participant
    • Posts: 26

    Order one of these. You will be happy. Vey easy to apply and impossible to get bubbles because it is glass. Make sure the screen is perfectly clean with the supplied alcohol wipe and tacky sticker supplied, lower the glass protector on slowly whilst holding by edges making sure at no time you touch the sticky side at all with your fingers and you will have a perfectly flat, bubble free, scratch protected screen.

    http://www.aliexpress.com/item/12Inch-9HGlass-Screen-Protectors-For-CHUWI-HI12-Tablet-PC-Tempered-Glass-Screen-Protector-Glass-film-H/32647159621.html

    I understand that you like the screen and it’s quite easy to apply.

    What about the screen sensitivity. I have got the Chuwi Hi12 a week ago and faced some sensitivity issues with the touch screen. more on the Android side than on W10. After removing the original cheap plastic screen protector comming with the device, things have improved. I wonder if the glass protector you mentionned has any negative impact on the touch screen response?
    Somebody has used an original Surface pro 3 and didn’t face any problem.

    Thank you for your advice

    #39276
    stroikersan
    Participant
    • Posts: 12

    I have found the touch response to be quite poor actually with the glass screen protector.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar