Chuwi Vi8 Plus bricked Windows

Chuwi Vi8 Plus bricked Windows

TechTablets Forums Chuwi Forums Chuwi Vi8 Discussion Chuwi Vi8 Plus bricked Windows

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #55898
    Richard Barbocz
    Participant
    • Posts: 4
    I have received the tablet yesterday and it is not working already… It should be an awesome one IF it could work.
    Android is working fine on it but the Windows partition had some issues.
    Every time I wanted to install or run something, there was an error message “The application has failed to start due to a parallel configuration error” or something like this. I figured that there was nothing on the tablet (C++ etc) so I installed them. It did not help at all so I reached a point where I started a full recovery without the deepformatting. The device was plugged in and there was about 80% of battery left. I received an error message that the recovery was not successful. From now on it will not do anything at all with the windows part. It starts up and there is a backlit black screen.
    Sometimes I was able to get into the recovery page, but not anymore.
    Is there a way for a hard reset or do I have to reinstall the Windows OS?
    If I have to reinstall the OS, would I be able to do it from a microSD card? Are there drivers for 64bit versions?
    Thank you all in advance!
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar