CPUID hardware monitor results?

CPUID hardware monitor results?

TechTablets › Forums › Cube Forums › Cube Mix Plus › CPUID hardware monitor results?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 30, 2017 at 11:08 am #71188
    Dhr. Jeep
    Participant
    • Posts: 62

    Can you explain what you did? Like, how did you mod it?

    August 31, 2017 at 12:53 pm #71232
    Miwashi
    Participant
    • Posts: 14

    I placed a 0.8mm copper shim on top of the CPU and then replaced the alumnium plate on top, then placed a thermal pad in the depression, then closed it.

    September 1, 2017 at 9:59 am #71288
    Stuart
    Participant
    • Posts: 4

    Did you use the thermal compound or whatever it’s called?  ( The paste stuff)

    September 3, 2017 at 6:55 pm #71455
    Dhr. Jeep
    Participant
    • Posts: 62

    Yes, like Stuart asks, did you use the cooling paste too?

    If so, did you glue or attach the 0.8mm copper shim with anything to the aluminum plate? Otherwise it might be that the shim moved around.

    Additional you can add extra thermal pads between de aluminum plate and the back of the tablet.

    September 11, 2017 at 2:18 pm #71964
    Dhr. Jeep
    Participant
    • Posts: 62

    I actually have the same problem now, let me know if you found any solution 🙂

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar