August 5, 2016 at 12:20 pm #45700
Here is a link for the i12 firmware:
The 7.8 GB rar-file, dated 19/7, is from this Cube download link:
As mentioned in the other thread here:
this firmware rar file is difficult to download from the Chinese site.
Here are the check-sums of the rar file:
SHA-1: 1e60b7fa1f76d826550de536fa092a1013101e29August 14, 2016 at 11:40 pm #46845DeanParticipant
- Posts: 63
ThanksAugust 16, 2016 at 2:47 pm #47024JoaquiParticipant
- Posts: 2
What are the differences with the version i12.V1.1.August 16, 2016 at 6:05 pm #47041
New version? Have not seen that, unless its printed on the back of a new factory release of the i12 tablets.
The i12 firmware on the cube firmware link is still dated 19/7September 9, 2016 at 1:31 pm #49325Ishan PerusingheParticipant
- Posts: 10
has anyone tried this firmware and know how to check current firmware.September 26, 2016 at 12:51 pm #50795zahidParticipant
- Posts: 14
Not possible to download.September 26, 2016 at 1:10 pm #50799
Sorry to hear that. I have just looked & it is still online. Here is the link again:October 15, 2016 at 8:58 pm #54982
thanks for the google drive link only took 5 mins to download.
according the translated doc.
it says run the flash65 batch in the bios folder, which i did.
it says don’t touch android unless its giving problems so wont touch it then.
since i received the tablet few months ago i only received one OTA android update and that was on first boot.
what does this firmware fix anyway?October 16, 2016 at 12:15 pm #55003
Thanks for the update.
The firmware is dated 19/7, and I guess this is the only & original version from Cube. I check the firmware site from time to time, but the original 19/7 download is still listed.
I have updated Windows to version 1607, the so-called Anniversary update.October 16, 2016 at 3:59 pm #55009
Downloading the new windows now. After updating the bios, android is stuck on boot up logo. Have to try fix that now, think the notes say I have to flash android in the windows bios.October 16, 2016 at 7:56 pm #55017
A general run-through document of the firmware installation would be useful, when you have completed the task, if you can be bothered.
The Chinese flashing document, given with the Cube firmware, is only really understandable after translation if you have experience of bios & mobile phone flashing, together with dual booting versions of Windows on a computer.
I have that experience & still I wasn’t sure about the translated document. As I said elsewhere, I can’t play around with the i12 that I have, as it is a gift for someone. Else, after making a full backup of the system onto a flash drive, I would try & rip out the Android partitions and use Windows alone.October 21, 2016 at 7:49 pm #55371PurjoParticipant
- Posts: 1
Did you find a solution to the android not booting part? I have the same problem.October 21, 2016 at 9:38 pm #55380
no, cant get it to work, just sits on the boot logo.
following the sketchy instructions which don’t add up don’t work.October 22, 2016 at 1:08 am #55387
Try this link to get info on drive partitions and also changing the dual-boot setup:
Start halfway down the page, and there is info that might be helpful.December 3, 2016 at 11:09 am #58025bobsontavParticipant
- Posts: 3
In case anyone wants the instructions in English I have used Google Translate and created an English copy. Although a lot of it doesn’t make much sense as the translation isn’t perfect, hopefully it helps someone though… https://drive.google.com/file/d/0B7-D-OktVA8oMnVfR2lHdXR2V28/view?usp=sharing
- You must be logged in to reply to this topic.