Cube Mix Plus Case

[fewt]

I have this case for both an i7 stylus, and an i7 book and it works great for both.  I believe the dimensions are the same for the mix plus.  Works great, the only “problem” is that the rear camera doesn’t line up with the cutout as it’s a surface RT case.

https://www.amazon.com/gp/product/B00DE8RZ80

[Vincent]

Looks like a nice case.  Is there anyway, or has anyone, tried to make their own type cover?  I love my mix plus but with the keyboard it is really heavy.  I was thinking of removing the metal weights inside and using a DIY keyboard type cover.

[Nat]

Awesome, that looks nice. I’m guessing if the Mix Plus fits that than it should fit any Surface RT case?

[riceart]

If cases from surface rt works for cube thats a great news, there is a lot of them and most are great quality. Thanks for the tip.
275 x 173 x 13.5mm  surface pro 2
275 x 173 x 8.9mm surface rt
273 x 172 x 9.6 mm cube mix plus
this is good since surface rt is old and worth nothing. I will order one.

 

[riceart]

Im thinking about buying this case
https://www.stilgut.com/ultraslim-case-v2-for-microsoft-surface-2.html
anyone can confirt that it would fit? cause selling this back will be extremely hard 😀

[fewt]

The only thing I’m not sure about is if it would work with the keyboard attached.  Our i7 book doesn’t have the keyboard so I can’t check, and the keyboard on the i7 stylus is significantly different.  With this case, the one thing that I needed to do was adjust the edges a bit with a pair of pliers, just to make the fit a bit more snug.

[Dhr. Jeep]

I don’t think it will work with the keyboard attached. The bottom corners have pieces of the case around it, with the keyboard attached I can tell that that will be a problem. I am typing this on the Mix Plus, I am looking at it and I am sure of it.

[riceart]

thats not a problem for me, cause i do not have keyboard. Ive ordered this stilgut. Will see if it fits.

[riceart]

and finaly it came and unfortunately it does not fit. :/ its stilgut made for surface 2 and those pieces that hold tablet in place are a bit to short :< I will try to bend them a bit but i do not think it will ever work. The biggest problem is that surface device have this shortening from front to back and cube is straight. I did not take into account 😛 Maybe cases made for surface rt would be better since surface rt is 9.4mm thick and surface 2 is 8.9mm according to microsoft page. Cube is 9.6 so not that far from surface rt. On the other side the leather and overal quality is perfect.

[Dhr. Jeep]

Anyone got an update on this? I am also looking for a case but cannot seem to find anything

[Author]

Posts