Disabled USB ports, how enable again?

Disabled USB ports, how enable again?

TechTablets Forums Chuwi Forums Chuwi Vi10 Discussion Disabled USB ports, how enable again?

Viewing 7 posts - 31 through 37 (of 37 total)
  • Author
    Posts
  • #27618
    ImADev
    Participant
    • Posts: 118

    My question is why are people adjusting the USB settings in the BIOS? If it’s because something isn’t working e.g. a headset that uses a USB soundcard then just do the following.

    1. Load up device manager and select “USB Root Hub (xHCI)”
    2. Click on the power management tab
    3. Remove the tick from “Allow the computer to turn off this device to save power”
    4. Press OK and reboot

    #27636
    Daniel Silva
    Participant
    • Posts: 6

    same problem, help me please

    #27637
    Daniel Silva
    Participant
    • Posts: 6

    when I try to access efi partition through the explorer of me error

    #27638
    ImADev
    Participant
    • Posts: 118

    Looking at your past comment history you’ve got a 221511 version? If you do then follow the instructions I wrote above and you won’t get the “STATUS_DEVICE_POWER_FAILURE” error for the camera anymore.

    It’s normal that you can’t access the EFI partition in Windows.

    #56292
    JAIME
    Participant
    • Posts: 1

    HOLA TENGO UNA CHUWI HI8 LE INSTALE UNA BIOS DIFERENTE A SU VERSION POR EQUIVOCACIÓN Y AHORA MI TABLET NO HACE NADA. SE QUEDO CON LA PANTALLA NEGRA Y NO RESPONDE A NADA. ALGUNA SOLUCION?

    #58044
    Opty
    Participant
    • Posts: 9

    I start my tablet today que USB is not recognised.

     

    Touch screen works properly. I don’t touch anything on BIOS!

    Anyones can help me?

    #61153
    luis
    Participant
    • Posts: 1

    Hola.

    Gracias a esto lo he podido

    solucionar.

    Thank you, my USB works again.

Viewing 7 posts - 31 through 37 (of 37 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar