Disabling Chinese Boot

Disabling Chinese Boot

TechTablets › Forums › Cube Forums › Cube i7 Book › Disabling Chinese Boot

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 4, 2017 at 5:17 pm #61596
    Cloppy
    Participant
    • Posts: 63

    Perhaps can we change the boot image?

    February 4, 2017 at 8:16 pm #61600
    Iahong Upoc
    Participant
    • Posts: 19

    I’m not sure that is possible, unless you can edit the BIOS. That would be cool though ?

    February 5, 2017 at 12:24 pm #61635
    Koray K
    Participant
    • Posts: 35

    I guess the boot image is the “logo2.bmp”, stored in the “C:\Windows\System32” folder.

    February 5, 2017 at 4:57 pm #61645
    Cloppy
    Participant
    • Posts: 63

    I don’t think so, it’s different than the one I see in my Mix Plus when booting

    February 5, 2017 at 8:17 pm #61654
    Koray K
    Participant
    • Posts: 35

    I see, they’ve changed the boot image for Mix Plus then… maybe it is the model name in Chinese, and the file may be a remnant from older version’s disk image. Attached image is the logo2.bmp from System32 directory, it’s the same Kanji (I don’t know the term is correct, so pardon me if I’m mistaken) as the boot image for i7 Book. Editing or deleting this file will not most probably change the boot image, but it may be a reference for a custom one assuing that it’s the same bmp embedded in the bios. BTW, it’s 120 x 120 x 24 bpp.

    March 29, 2017 at 12:39 pm #64190
    Zek
    Participant
    • Posts: 3

    on bios(at the boot section)

    -disable quiet boot.

    after that it shows you traditional at open screen.

    April 8, 2017 at 6:24 am #64876
    FUCKTECHTABLET
    Participant
    • Posts: 176

    When m Mix Plus comes back I will try this


    FUCK FUCKTECHTABLET

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar