Does the X98plus DUAL support OTG charging?

Does the X98plus DUAL support OTG charging?

TechTablets › Forums › Teclast Forums › X98 Plus Discussion › Does the X98plus DUAL support OTG charging?

Tagged: 

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 8, 2016 at 5:06 pm #25399
    Peter
    Participant
    • Posts: 16

    Bump! Please, could someone check it both in Windows and Android?

    February 10, 2016 at 12:01 pm #25598
    Dushan
    Participant
    • Posts: 8

    Hi Peter,

    I have ordered USB OTG hub from eBay. A different one from all mentioned by users who have reported that theirs don’t work with X98 Plus. I have a dual boot X98 Plus. Now, the hub has 3 switch positions, this tablet is not listed as compatible in the leaflet that came with it. Positions 1 and 2 charge the tablet, when switched to position 3, it charges and recognizes the USB stick plugged into it. After 30 seconds, it stops charging and disconnects the USB key. Don’t know what the hell that’s about.. This is all under Win 10. I will check the behavior in Android now. Just gonna finish this comment and then boot into Android. Funny…

    February 10, 2016 at 12:15 pm #25600
    Dushan
    Participant
    • Posts: 8

    Ok, checked Android now. Positions 1 and 2 charge, but no USB visibility, position 3 – no charge and USB stick is visible.. Back to square one for me..

    February 10, 2016 at 10:31 pm #25654
    Peter
    Participant
    • Posts: 16

    Thanks!

    You saved me a lot of time trying to flash the Dual EFI to my Win-only X98plus for nothing.

    I have several OTG+HUB+charger cables and none of them works. It seems it is a hidden EFI setting that Teclast (incomprehensibly) left disabled in this particular model.

    Cheers!

    February 11, 2016 at 8:32 am #25686
    Dushan
    Participant
    • Posts: 8

    U r welcome!

    It’s funny though – from H/W point it really seems that the Tablet is capable of doing it. It has to be some kind of setting.. The thing is which?

    February 11, 2016 at 10:00 am #25692
    Nicola
    Participant
    • Posts: 54

    Dushan, you are right. Technically speaking the tablet is capable of charging while in OTG mode. See my post on the other thread:

    http://techtablets.com/forum/topic/otg-hub-or-adapter-that-works-with-the-x98-plus/page/2/#post-25000

    February 12, 2016 at 11:42 am #25795
    johnannis
    Participant
    • Posts: 3

    Just to say that my Win10 X98 plus doesnt charge with otg.

    Let me describe my setup. I just put a usb male to male to my usb plug, then connected to my OTG cable and then to my tablet. Result : not charging.

    Hope it is a clue

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar