Driver Power State Failure

Driver Power State Failure

TechTablets Forums Chuwi Forums Chuwi Hi12 Forum Driver Power State Failure

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #46319
    onjon
    Participant
    • Posts: 8

    Hi all

    using the dual boot in windows today and it became unresponsive then I got a restart message (see image) then it happened again so have posted here.

    The only other issue I had that is linked to this is yesterday I tried to turn tablet on and it didn’t start so I connected the power and the LED started to blink (I assume this is charging mode) after 5 minutes or so I tried to switch it on again thinking that if it’s connected to a power source I should be able to use it regardless of battery charge %.  It didn’t turn on and more worryingly the charge light was no longer flashing, it appeared to be a dead tablet.  I tried a different power source now change still dead.  I then just connected it to a computer and after a good while the light started flashing again.  Left it overnight and it switched on this morning.  then did what it states in the image twice.

    what should I do any ideas? besides the obvious of searching online for this error.

    Attachments:
    You must be logged in to view attached files.
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar