dual boot fm scratch

dual boot fm scratch

TechTablets › Forums › Teclast Forums › X98 Air 3G / Air II – Single and dual boot › dual boot fm scratch

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • October 19, 2015 at 5:45 pm #13623
    vasilis
    Participant
    • Posts: 6

    sirs,

    iam new in the forum

    i bought a teclast x98 air ii 3g  with dual boot,but iam in the situation that the tablet came with error loading dual boot and only boots with android,

    i would like someone to help me to make the dual boot android 5 and win 10 from scratch.

    what i must do,what files i must download and how i can make a boot usb flash in order to make my tablet to boot with 2 os and have it in normal use,because i have 1 month and after multiple letters to geekbuying support(fm where i bought it) i have not found a solution.PLEASE HELP.

    October 20, 2015 at 2:41 pm #13749
    Kerry Sharman
    Participant
    • Posts: 4

    Hi Vasilis,

    If you had the same problem I did with no option to select Win or Android ,shut down then reboot.Press the up volume switch about the same time.You may need to press a few times.You will then get the Win /Android option back. One of the guys here is going to post how to put an icon on Windows to allow you to boot into Android. I think he has instruction on the reverse procedure already.I am not sure if this your problem but hope it helps,

    Regards,Kerry

    October 21, 2015 at 7:05 am #13805
    vasilis
    Participant
    • Posts: 6

    kerry,it is not the same problem,thanks for the notice but i Must scratch it because althought i’ve done all the appropriate things to change language to english and greek fm chinese in win 10 all gone to the wall ……i belive that the initial flash fm factory was corrupted ,so the only way is to scratch it fm the beggining ,in lollipop &win 10 but ,i want some directions and the custom files that i have to use in order to make it “tablet” again.Thank you in advance.

    October 21, 2015 at 4:22 pm #13847
    Kerry Sharman
    Participant
    • Posts: 4

    Sorry Vasilis, I am not very good at understanding these things.Hope someone else can help you.

    Regards,

    Kerry

    October 24, 2015 at 5:03 am #14046
    Julyfish
    Participant
    • Posts: 65

    You may want to upgrade your BIOS?

    You need a separate PC to do this. The following steps are extracted from Zelgar post Here, a very good summary indeed.  You need a fully-charged X98.

    1. Install the ADB drivers following this guide – Here
    2. Followed the Bios upgrade guide  – Here
  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar