EDIT : well it works again, also after plug/unplugs and reboot… Right after I turned off the tablet pressing the power button in the setup/bios Advanced page, on the next reboot the external screen was working again. Before that the problem kept occuring for 1 hour with many reboots… weird.
This thread might help others encountering the same issue.
Hello,
My cube mix plus does not see any screen connected anymore I tried with 2 different type C HDMI hub and 2 different screens.
Can someone with two screens connected confirm what is displayed in bios/setup menu for this item :
“AMI Graphic Output Protocol Policy” in “Advanced” page of the Bios Setup under “Output Select” : I only see “EDP1” value.
There should be 2 values, correct ?
Edit : I confirm that there are 2 value after the problem solved itself : EDP1 and DP2
During holydays, I connected it to an old Sharp TV and it was working fine.
I don’t think it is software/driver related, because I remember that my monitor was displaying something while booting windows.
I restored “Bios Optimized default settings”without success
Thanks a lot for any help on the subject.
.
