Ezbook 3 Pro (rev 4) not booting from cloned SSD

[George G]

Hi

Did you solve your problem?

Did you look in Windows disk management to confirm that the SSD is listed and showing the correct partitions?

Which SSD did you use?

You might try cloning it again, or use a different program. Others on the forum have had success with Aomei. I used Macrium Reflect free v6 to clone my SSD.

Changing the boot order is pretty straightforward. You should see two boot managers listed there, just make sure you select the correct one that corresponds to your SSD.

Beyond that, there should be no other UEFI/BIOS settings required for an SSD boot.

[Author]

Posts