fix teclast wifi plus II and burned X98 hardware

[cantedubi]

 

I’ve been watching tutorials on how to fix the problem wifi reach this tablet, Teclast x98 plus II. They say that you must replace the cable wifi with two cables. I did and it worked very well for a month until the wifi and bluetooth has stopped working.

I open and see that the plate has been burned. Does anyone know how to fix it.

PS: The two green wires are the ones that I replaced.

Attachments:

You must be logged in to view attached files.

[David]

Once you have a burn like this it’s pretty much over for that component. You’ll need to get a replacement tablet. This is why I haven’t touched the insides yet. It’s already finicky to begin with and it could just stop working any moment.

[Golden]

I think you did a neat job on your soldering. It’s likely that your green wires actually become the antennas. However, since no electricity runs through the antennas, is think it is unlikely that your mod is related to the circuitry burnout. Just bad luck and coincidence.

You should still be able to get wi-fi via a USB dongle in Windows.

By the way, I’ve found our tablet remarkably robust for opening up and tinkering with. Mine has been opened and soldered on a dozen or so times, still works fine.

[Author]

Posts