Fixed X98 Plus Touch

Fixed X98 Plus Touch

TechTablets Forums Teclast Forums X98 Plus Discussion Fixed X98 Plus Touch

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #48115
    Frank
    Participant
    • Posts: 11

    Finally fixed touch screen on my X98 Plus (A6C7) after updating Windows 10. This should work on all versions of X98 tablets using same screen

    Put the attached ‘TouchSetting.gt’ file into C:\Windows\INF folder and reboot, that’s it

    Changes I have made to the standard touchsetting file are

    UpdateCFG=1

    ESD=0

    X2X=1

    Y2y=1

    NumberOfKey=1

    Now I just have to find a solution to the tablet rotation issue (rotating upside down) and getting rear camera (ov5468) to work.

     

    #48116
    Frank
    Participant
    • Posts: 11

    Got an error with the upload of touchsetting file, try this but remember to rename file by removing ‘.txt’ part

    Attachments:
    You must be logged in to view attached files.
    #49020
    nos
    Participant
    • Posts: 1

    Thanks, fixed my touch issue.

    I managed to fix the autorotate by adding a new binary key to the registry

     

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\ROOT\SENSOR\0000\Device Parameters\kxfusion]
    “Orientation”=hex:00, 01, 01, 01, 00, 01, 02

    #49071
    Frank
    Participant
    • Posts: 11

    Thanks for the rotate fix, I would love to try it but my tablet has died again after another Microsoft update.

    I have got a total of 12 MS devices including desktops, laptops, tablets and phones and this Teclast tablet is the only device that I have problems with.

    It is without doubt the worst device I have ever owned

     

    #62328
    Rush
    Participant
    • Posts: 6

    unluckily mu touchscreen is still not working.

    with the official file cfg they are mirrored, with your file I can’t find the logic of the touch, I suggest that they should make a software to calibrate the thouchscreen!

    thank you for trying anyhow 🙂

    #66764
    Michal Ondik
    Participant
    • Posts: 1

    Hi Guys I had simmilar problems and I have A5C8 so here are my numbers

    after updating Windows 10. This should work on all versions of X98 tablets using same screen

    Put the attached ‘TouchSetting.gt’ file (from upper post) into C:\Windows\INF folder and reboot

    Changes I have made to the standard touchsetting file are

    UpdateCFG=1

    ESD=0

    X2X=0

    Y2y=0

    X2y=0

    NumberOfKey=1

    And also I had same binary key

    LAST THE MOST IMPORTANT was in CONTROL PANEL > TABLET PC SETTINGS > CALIBRATE!!!

     

    #142545
    Tof
    Participant
    • Posts: 9

    Works like a charme ?

    Thanks a lot

    #142859
    Laura
    Participant
    • Posts: 3

    I tried with both files touchsetting.gt and my Tablet is not calibrated properly, I still have to use it with mouse.

    Please some help? I have the rotate problema too.

    #182807
    Tiago
    Participant
    • Posts: 2

    Hi everyone,

     

    Tried this fix but no luck. I installed the stock drivers and it is calibrated now, the only problem is that when i touch the screen it right clicks instead of left click. Ive been working on this for a while now and no luck. Has anyone had this problem?

     

    Best Regards

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.

Lost Password