"Fixed"touch screen problem solved and drivers problem solved

[Abraham Pomodorino]

Michał wrote:

Hi I have 221511 32gb

And you don’t have the broadcom wifi & bluetooth drivers and the non realtek audio card? Because with the Double Driver backup you post is imposible to this drivers.

[Abraham Pomodorino]

umair wrote:

I have 22150504522 install windows 10 version.1511 10586 then install 76.6 mb driver from win 8 section.with double.driver

I don’t understand. Do I have to install an specific windows 10 version (1511 10586)¿? Why? =S

[Abraham Pomodorino]

Eras wrote:

Michał wrote:

hmmm i’m not upgrade bios. I have sn 32g221511

Oh, ok, nevermind. All I know is that I have seen that error before: ” (Kod 10) (Can’t run this device. (code 10)) The device returned an invalid HID descriptor.” But it only happens to me when I flash Bios G1D, and I have to flash the older Bios J1D (V1032G Dual Boot BIOS111 (8.2 MiB)), and install the correct “Chuwi Vi10 Touch Drivers Installer (74.5 KiB)” file in order to make it work. But again, experiment at your own risk. “

I have a lot of doubts now… I just flashed the bios you say and it’s the G1D! and you said here that had to flash the J1D. I’m very confused… I have the J1D everything works except for the front camera… I think I just lost my time

[Eras]

Michał wrote:

Hi. I Change next time bios (now 8.1 mb from download zone). Now system see touch screen with 5 point stick, but doesnt work. Bluetootch, audio, light sensor not working. Any ideas ?

 

Ok, I finally got all my drivers to work, and remember the sequence to do it properly. I will make a tutorial here soon to help you out, but just remember, we might not have the exact same model of this tablet.

 

Abraham Pomodorino: I was trying to help Umair with the touch drivers, I don’t know about your camera drivers, sorry.

[umair]

Make video if possible

[Author]

Posts