Flash stuck at 5% with MFT

[Andre]

I flashed Mirek v7 ROM on my Air III (m5c5) and I didn’t manage to boot. I had previously flashed v6 and it went just fine. Then I repartitioned using the bat file in v7 and flashed the v7 ROM. Now I got a black screen whenever I boot into Android. I decided to flash v6.1 but now I cannot do it either through MFT or through the bat in Mirek’s ROM.

I get stuck at 6% with the message [FAILURE] IFWI flash failure whenever I try to flash with MFT. The log file is as follows:

 

01/17/16 16:15:35.692 INFO : Manufacturing Flash Tool V 6.0.43 (build on Sun May 18 12:29:29 PDT 2014)

01/17/16 16:15:35.723 INFO : Loading settings from C:/ProgramData/INTEL/Manufacturing Flash Tool.ini

01/17/16 16:15:35.738 INFO : Using Qt version: 4.8.1

01/17/16 16:15:35.738 INFO : Using XFSTK version: 1.5.5.

01/17/16 16:15:35.754 WARNING: Please select a flash file…

01/17/16 16:17:19.235 INFO : Loading Flash file (D:/__DRIVE/Users/André/Downloads/X98_Air_3g_android_5.0_mirek190_v6.1-ultra-light/ROM/flash-system_only_WIPE_DATA.xml)

01/17/16 16:17:19.260 INFO : GP_Flag is set to 0x80000045

01/17/16 16:17:19.282 INFO : Ready to flash!

01/17/16 16:17:30.761 INFO : do_new_medfield_device STARTING TO FLASH

01/17/16 16:17:30.762 INFO : Port 0/1/1 #0: IFW flash started – SN : Baytrail00000646

01/17/16 16:17:30.762 INFO : Disabling xFSTK wipe out ifwi option

01/17/16 16:17:30.762 INFO : Disabling xFSTK Misc DnX

01/17/16 16:17:39.032 INFO : Disabling xFSTK wipe out ifwi option

01/17/16 16:17:39.032 INFO : Disabling xFSTK Misc DnX

01/17/16 16:17:39.032 WARNING: Port 0/1/1 #0: Retry IFW Flashing – Serial: Baytrail00000646

01/17/16 16:17:48.233 INFO : Disabling xFSTK wipe out ifwi option

01/17/16 16:17:48.233 INFO : Disabling xFSTK Misc DnX

01/17/16 16:17:48.233 WARNING: Port 0/1/1 #0: Retry IFW Flashing – Serial: Baytrail00000646

01/17/16 16:17:57.440 ERROR : Port 0/1/1 #0: IFW flash failed – SN : Baytrail00000646

 

What can I do to fix this? Any help would be appreciated.

EDIT: This are the values in the MFT settings: SOC: VID 8087, PID 0A65. Android: VID 8087 PID 09EF. Thanks.

[Andre]

I’ve finally solved this myself: the CUSTOM_CONFIG.INI files were not being copied by the TTT bat. I’ve manually copied them to C:\Program Files\Intel\MFT and now it works.

[George]

Hey dear friend.

I have the same device, the same log file and..at last, the same exactly problem.

Could you make it more clear for me, what exactly you did, cause I’m noob..you know..

You mean, should I copy-paste the CUSTOM_CONFIG.INI file manually to  C:\Program Files(x86)\Intel\MFT of my PC (Win 7) and then to try again to flash and that is all? So simple?

Thanks in advance.

[George]

At last i did that succesfully, I can get into bootloader now, before I could not..but nothing more, device still stucks at Chinese logo..

[Author]

Posts