Help

[silverstar]

To enter bios, press ESC @ chuwi logo (use usb keyboard).

In case you want to format off your tablet.
http://techtablets.com/2016/01/cube-iwork8-ultimate-gets-dual-boot-files-and-how-too/

If refreshing android installation from scratch and want to resize it, see link below, the 4gb file works for me.
–removed link– check few posts down

Otherwise, just run disk cleanup to delete off old files, old windows installation files are like few gb so it may be solve your disk issues.

[Thanasis]

Use a USB keyboard over the OTG adapter and hit Escape  on boot (Or DEL, my memory doesnt serve me right now and I dont have it with me). That way you can acces the BIOS

An alternative it to power off your tablet and then turn it on by holding Volume-UP and the power button until it boots into BIOS (the keymap on the bottom right are also touch buttons… so if you want to go back a menu, tap on the ESC/Right Click : Exit  option on the bottom right)

Once there…  Go to Advanced-> System component  , and Enable “MS Custom sdbus Driver”  , then save end exit your BIOS. That should enable your SD Card in Windows

[Fa2]

Thank you very much
but i want a way to format windows 10 to stock not android my android is perfect
i find a way but i don’t know does it work or not
setting / update and security / recovery
thanks

[silverstar]

The recovery reset thingy should work, I’ve tried it but it takes ages. If you do that, let it run, its very slow and you’ld think it hanged but its still working. Its faster to just re-install the Windows image again from that link I pasted earlier.

Disk cleanup didn’t clear up any space?

[Fa2]

Can you explane to me how to install it i just want to rest the windows because it’s stuck at 64% and it’s geeting loop my android is perfect what can i do ?
thanks

[silverstar]

I already posted the link above but here goes:

Cube iwork8 Ultimate How To Flash Dual Boot With Download

just follow the instructions to re-flash windows

[iwork8night]

hello together

sorry silverstar, your hint with ‘gpt.bin’ is very dangerous! you use the ‘gpt.bin’ for a teclast-tablet. look in your device-manager. dont wonder if in ‘firmware’ is a teclast entry. if you would update the driver here- windows will flash the tablet with a teclast-bios. after that the tablet is bricked. no chance to reset. so i bricked my (first) tablet. but the idea was good and alive.

i bought another iwork8 ultimate. 🙂

i found out the recognition of teclast and replaced it with cube.
it works fine. no teclast entry.
look at: http://techtablets.com/2016/01/cube-iwork8-ultimate-gets-dual-boot-files-and-how-too/#!
Pimp my Cube iwork8 ultimate

and here, at this post , is the gpt iwork8.zip
enjoy 🙂

Attachments:

You must be logged in to view attached files.

[silverstar]

well i tested it on my iwork8 and it worked, which is why I’m saying it here. My screen died and I figured, what the heck, I tried it and it worked.

Hmm idk why it bricked your tablet tho. Unless u hit the ridiculous Windows update bug that for some reason updates your firmware. My windows update is turned off. Mine is still working fine, tho with a dodgy screen.

Anyway, removed the link. Ty for the iwork8 version. Will try if something happens to my tablet in future.

[Fa2]

Thanks But Last Question Is The Topic (Cube iwork8 Ultimate How To Flash Dual Boot With Download) Say But Folder In Drive C But I Can’t Get To My Windows So Can I Skip That Tutorial Until I Get To My Point

[silverstar]

Fa2 wrote:

Thanks But Last Question Is The Topic (Cube iwork8 Ultimate How To Flash Dual Boot With Download) Say But Folder In Drive C But I Can’t Get To My Windows So Can I Skip That Tutorial Until I Get To My Point

I’m sry but I don’t really understand the question.

Are you referring to the extracted files? I downloaded and extracted them to another pc, then following the instructions in tutorial, created a usb drive for flashing windows.

[Fa2]

No My Question Is I Can’t Get In My Windows In The Tutorial He Said

(Extract the archive you downloaded, you’ll have 3 folders. BIOS, WIN10 and 安卓 (Android Rom)
Extract the BIOS folder to your C/: drive root. Inside the drive run (As admin) the flash.bat (Dual OS bios will flash) DON’T )
I Can’t Do This Because I Can’t Get In My Windows

And I Can’t Get My Windows 10 key

I Am Sorry If My Language Is Bad
Thanks Alot

[silverstar]

Do u have another PC/notebook etc? Extract all the files to another computer. Any computer will do.

You don’t need the windows key since you are re-flashing from cube’s files to orignal state.

[Fa2]

Yes I Have And I Extract All File Than

I Am Sorry If I Am Bothering You

[Beben Bunyamin]

Help Me

my cube iwork air8 air have bricked after updete bios

[Author]

Posts