Can anybody with HI10 please post the ME firmware version. It is visible in bios setup. You have to enable “show all” in the save and exit section for it to display.
I get this error on startup “ME firmware update failed, please try again” because i had interrupted the automatic bios flashing, by disconnecting the battery.
I had flashed the bios by using the ch314a programmer. The tablet booted but soon it rebooted and went into automatic bios flashing. Fearing that teclast bios is flashing again i immediately removed the battery connection. Since then i am getting the error “ME firmware update failed, please try again” on startup screen everytime. This error message remains on the screen for about 2 minutes then The tablet boots and windows 10 loads and works properly.
I again reflashed the bios by usb drive method but that did not solve the problem , as this method does not flash or update the ME bios part / section of the bios chip.
Can anybody help !!!
.
