TechTablets › Forums › Cube Forums › iwork8 Ultimate / iwork8 Air Discussion › help me iwork8 ultimate reset
- This topic has 8 replies, 4 voices, and was last updated 10 years ago by
dirtyKIMCHI.
-
AuthorPosts
-
June 3, 2016 at 4:54 pm #39729
Can you explain a little more about your problem so we can understand?
Have you tried to boot to BIOS using a USB Keyboard? The tablet from what I ve seen in my own experiments, resets the BIOS settings automatically when you change something and it cant boot (kind of like the overclocking protection that some motherboard BIOSes have)
June 5, 2016 at 9:32 am #39887i can’t to boot in bios also, i try to use hdmi also , because i think i change something bios ram setting …. so can’t boot up at all…. no… that is cube iwork8 ultimate no automatically reset…..
June 5, 2016 at 11:20 am #39908Does it turn on?
If you re confident with soldering… you can pop it open and desolder the battery cables. I havent seen a BIOS battery on it, so I guess if you remove the battery for a couple of hours it will reset.
Of course only do that if you re confident on your soldering skills, and you do it at your own risk. You can easily damage your tablet or your battery.
(And it goes without saying that if you do a bad connection and something short-circuits, your battery might explode)
June 5, 2016 at 3:32 pm #39932i take out battery for half day , and i press more then 1 min in power button , and is it still can’t .
and i know it is turning on , because of i can feeling that processor hot…..
because in our tablet dont have any cmos something like that…. is save in like IC chip so can’t be reset…… so…. how to save it….
sorry for bad english….
June 6, 2016 at 7:53 am #39972can u output to hdmi? cos that’s what happened to me, my screen sorta died but output to external monitor was fine so I can actually still use it for light tasks, just not very mobile…
or if your bios is really messed up, u would need those programmable chip thingy that I was reading abt in the chuwi hi12 forums probably.
June 7, 2016 at 2:39 am #40090Since the UEFI is AMI based, try this AMI UEFI BIOS Recovery. This link is for non-UEFI, but may work.
June 8, 2016 at 5:07 pm #40291So how i find the bios in iwork8 ultimate
Where can download and rename it
Hdmi is not work also , i try already
June 14, 2016 at 9:06 pm #41010Use the BIOS file from the Dual Boot article: http://techtablets.com/2016/01/cube-iwork8-ultimate-gets-dual-boot-files-and-how-too/
-
AuthorPosts
- You must be logged in to reply to this topic.

