The Teclast bios updater for the A5C6 is web based and in itself did not contain the bios file. It downloads the file from the internet. I am sure it was somewhere on my tablet and I should have saved it. It has been long erased now with cleanups etc. If you dig around on the Teclast bbs, you may be able to find the actual bios flash file itself.
You may find some help here:
http://techtablets.com/forum/topic/install-windows-only-on-x98-plus-dual-version/
In the second post I linked to my thread about converting to Winfows only, I recomend that you just disable fast boot and install the original A5C6 teclast windows only image file to reformat your partition table…..BUT that won’t get your camera back 🙁
Please report back if you can figure out how to do this as it may help others.
P.S. There may be some light at the end of the tunnel for people. Hopefully Teclast will release a new windows only bios to fix the sd card issue soon, and that file should flash over the old dual boot bios! Or even a new dual boot bios with a fix for our hardware version of the camera…highly unlikely as the same issue plauged the baytrail version which had 3 or 4 diferent camera modules!!
Max
.
