How to " unbrick " a Teclast X98 Air

[Kay pira]

Hello ,

I have a Teclast X98 Air C9J6 I try to install win 10 64 bit and I managed to “brick” my BIOS and now my tablet don`t even start up so I well and I would like to flash the EEprom from my pc. That would be the fist time for me so some help (please, please, please) would be more then welcome. My question would be also relevant for a lot of people as seems there is no so much information to how to do that. I got:
24/25 series EEPROM Flash USB Programmer CH341A Software&driver . The chip is a W25Q64DWTIM which operates at 1.8V.

SOIC8 SOP8 Flash Chip IC Test Clips Socket Adpter BIOS/24/25/93 Programmer

Can I use those to flash the eprom?

Sorry for my bad English.

Thanks,

[ThenVC]

Try this, i had succeeded.

http://bbs.teclast.com/forum.php?mod=viewthread&tid=522256&extra=&highlight=%B1%E0%B3%CC%C6%F7%CB%A2bios&page=1

 

[Djadidi]

Hello, I had the same problem. I flashed with the eeprom programmer everything seems ok but my tablet won’t boot up… Any idea ?

When I read the bios with the software it is not blank I really flashed with success so I don’t understand why don’t boot up.

[Author]

Posts