TechTablets › Forums › Cube Forums › Cube Mix Plus › I need an help (shutdown automatically)
- This topic has 1 reply, 1 voice, and was last updated 9 years, 2 months ago by
Vincenzo.
-
AuthorPosts
-
May 5, 2017 at 3:50 pm #66555
Hi, I bought the Cube Mix Plus (Banggood) and 3 days ago the tablet is arrived, I had a problem when I tried to set in Control Panel, Option Energy Saver, from Balanced to High Performance, the tablet start to reboot automatically (with a black screen) after 2-3 minutes when i tried watch movies on Youtube or using camera, i set back on Balanced and it reworked again…I tried to install a language pack without success and I decided to do Factory Reset, I attempted some hours but it had a problem and the Factory reset can’t continued (the only method for repair was a fresh install)
Here in this website I downloaded the file to reflash the system, ok i tried it but all thing are in Chinese and I tried to change Language without success I attempt some hours with internet but Nothing (and clicking on Language or Windows Update), I didn’t tried if in this system had the problem of Automatically Shutdown.
So Yesterday I decided to reinstall the system using a normal iso (Creators Update x64 Italian), I made a Backup of driver of Chinese build and I used in these build…but I had the same problem of the First Build (Shutdown automatically), I tried to reinstall it 5 times with different drivers on the web or with Double Drivers Backup nothing, I open Youtube or Camera and It shutdown automatically.I like so much this tablet and I can’t not use it for these stupid problem…Can anyone help me to fix this problem, I checked in this build is everything ok but it Shutdown Automatically…I think is not a problem Hardware because with the first build I played to GTA 5 for 1 hours without problem the temps was good (82°).
I think I need Drivers or a Build working, thanks to anyone helps me!
May 6, 2017 at 10:16 pm #66622Ok i fixed it, if anyone had this problem the fix is go in control panel , option power save and in any profile have to set the clock of processor at 1700 mhz, disable PCI Express Link etc and disable Selective USB shutdown.
I also installed the driver from another site web (original drivers of December 2016) in this forum there is a post called “Driver” and contain it -
AuthorPosts
- You must be logged in to reply to this topic.

