I royally screwed up…

I royally screwed up…

TechTablets › Forums › Chuwi Forums › Chuwi Vi10 Discussion › I royally screwed up…

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 18, 2015 at 9:04 pm #16065
    Chris G
    Keymaster
    • Posts: 2677

    I’m not very experienced in EFI shell commands, but if I remember correctly I think you can still boot Windows at least from one of the USB ports.

    http://techtablets.com/forum/topic/x98-pro-dual-os-firmware/#post-12138 It’s the X98 Pro, but might help in mounting drives in EFI shell.

     

    Can you get into DNX mode? Power on holding vol+ & – it should display DnX mode and you can at least flash Android and partition the eMMC. Later install Windows image.

    Chris | Admin
    Please support us and help keep TechTablets online. Affiliate revenue is used to pay for the server, studio apartment (Techtablets HQ) and buy new tech to review. Without it, this site would be dead.
    Next up for review:
    Ordered and waiting for my: BMAX S15 & Teclast F6 Plus
    Currently testing: LG G8X & Redmi K30

    November 18, 2015 at 9:21 pm #16066
    brandon
    Participant
    • Posts: 6

    I can use a bootable flash drive to boot into windows recovery, yeah, but most of the system files are wiped from both OS’s….yes i can boot into DnX but cannot flash as of yet because the partitions they are trying to flash onto dont exist….uugghh lol – im pretty tech savy with Linux/Android and Win so this is irking me lol. i just found a solution to at least install windows 10 on it and i can partition off some space for android afterwards – or maybe gonna try ubuntu instead of android…?  i’ll check out that article now and get back – thanks so much for the reply i been watching the screen of this laptop too long hahaha

     

    November 18, 2015 at 9:30 pm #16067
    brandon
    Participant
    • Posts: 6

    ok i got it figured out to a point….all i need to know is how to find my product key so i can reinstall and/or upgrade?????   this is something i am clueless as to how to go about it – i tried a ton of things i read.

     

    November 21, 2015 at 10:25 pm #16293
    Jadrix
    Participant
    • Posts: 22

    This program reads serials from bios. When you start .exe the program creates a file named “OEM-DM.txt” with your windows serial number!

    Attachments:
    You must be logged in to view attached files.
    November 27, 2015 at 9:43 pm #16888
    brandon
    Participant
    • Posts: 6

    thanks…but i accidentaly partitioned the whole HD so i cannot run an .exe file yet.  I’ve got all the stock images now just trying to find instructions in english…

     

    November 29, 2015 at 3:39 am #16985
    Jadrix
    Participant
    • Posts: 22

    Maybe you can try to boot with some Live windows USB and start the program from there!If I can do it with Macrium reflect boot USB you can do it also. Sorry for my bad english!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar