Jumper EZPad Mini3 Install windows 10 32bit (x86)

Jumper EZPad Mini3 Install windows 10 32bit (x86)

TechTablets Forums Jumper Discussion EZPad series Jumper EZPad Mini3 Install windows 10 32bit (x86)

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #49872
    juan alvarez
    Participant
    • Posts: 4

    Hello, the tablet only lets you install Windows 10 home x64, it carries the serial number of Windows 10 recorded in the bios, in a Russian forum saw that recorded an image of Windows 10 pro and did it run, but having no knowledge of Russian, I have not tried, they have in the forum a complete picture of the emc memory and copied whole, solving what the serial number.
    I’m also very interested, because I believe that Windows 10 is an offense to the user, mandatory updates, a browser that can not be changed or deleted, a lot of bootware, eat 20 gb memory, constant updates and mandatory you leave the pc useless when you need more problems and hundreds more as constant failures with Metro applications, it would be good to installing a pro lite windows 7 x86 or failing a lite windows 8 x86.
    Maybe someone can lend a hand.
    If anyone dares to Russian forum, to say it and I put the link.
    A greeting.

    #50044
    smarus
    Participant
    • Posts: 16

    So far I have installed on it Windows 10 Pro v.1511 En-us x64 July2016 and Windows 10 Pro PIP LITE [64 bit]. The tablet is move fast with LITE…But I want a Windows 32bit, 64bit  in 2GB RAM is nonsense because only operating system occupies the entire memory.

    #50045
    juan alvarez
    Participant
    • Posts: 4

    Hello, smarus, you could pass me a link to unburden 10 Lite and tell me as installed, for me, just let me Home versions.
    I tried barios liveusb linux, and I could only move the UEFI boot x64 versions.

    #50047
    smarus
    Participant
    • Posts: 16

    Enter in bios(hold power and volume up button), select “Administer secure boot” and enable “Erase all secure boot settings”, so I did. Make sure the “Secure boot database” is unlocked and “Secure boot status” is disabled Use program Rufus  and choose GPT partition scheme for UEFI to make boot usb stick from windows iso. https://justtorrentz.com/torrent/12199572/Windows_10_Pro_PIP_LITE_%5B64_bit%5D_-_AppzDam

    #50099
    smarus
    Participant
    • Posts: 16

    X64 Windows 8.1 can be installed but are not compatible drivers.

    #50115
    juan alvarez
    Participant
    • Posts: 4

    Thanks, today I tried the REMIX OS 3.0.204, the operation has been very good, but I needed an external sound card and wifi.
    If I get something with x86, I’ll put in the forum.
    that drivers failed to windows 8?

    #50116
    smarus
    Participant
    • Posts: 16

    Yes, unfortunately original Windows 10 drivers are not compatible, do not want to install in Windows 8.1. Maybe another program like Driver Magician can find …

    #50500
    smarus
    Participant
    • Posts: 16

    Maybe someone is trying to put bios from Teclast X80 Pro…

    #56677
    shashank tyagi
    Participant
    • Posts: 10

    I was also trying to install Windows 10 x86 and while searching came across rEFInd Boot manager. I tried to install the boot manager over existing Windows 10 x64 installation thinking it would allow for x86 installer to start but unfortunately the table is hard bricked now.

    If someone can take backup of their bios and provide me than it would be of great help, as i am now where getting the bios files for this tablet on internet.

    #56680
    smarus
    Participant
    • Posts: 16

    Sorry, but I already sold tablet and do not remember if I made a copy of the BIOS. I did however a folder where I

    saved some stuff about bios, but Teclast X80 Pro bios (one tablet about the same configuration). There may be in

    that folder and bios of the tablet Jumper Ezpada Mini3.

    Attachments:
    You must be logged in to view attached files.
    #56682
    smarus
    Participant
    • Posts: 16

    Try this maybe can help: Dear friend
    Good day
    1> can your tablet be charged? if your tablet can be charged,please charge it full, press the “power ” +”voice — ” buttons at the same time for 30 seconds.
    2> if your tablet can not be charged,please change a new charger or a charge cable to have a try.
    3>if the tablet can be charged,but,it can not be turn on, please pressing the power button three times quickly,
    in succession, and then holding the power button down for ten seconds.If the tablet can be turn on, it is ok.
    4>if the problems remain after that,please check it in your local repair store.
    Hoping you can solve the problem soon.
    Best regards.

    #68130
    leland
    Participant
    • Posts: 3

    is this still good for $99 from geekbuying?

    #68132
    smarus
    Participant
    • Posts: 16

    It was the best version at that time. Now I can not pronounce myself because I’m not aware of the new releases … I sold it in the meantime because it did not have a good signal wifi.

Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar