List of devices w or w/o LED screen PWM

List of devices w or w/o LED screen PWM

TechTablets Forums Chinese Mobile Phone Discussion General Mobile Discussion List of devices w or w/o LED screen PWM

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #79376
    Eat Up
    Participant
    • Posts: 12

    Basically for anyone looking to buy a mobile device listed on this site.  They may come with or without LCD screens that exhibit PWM (pulse-width modulation).

    What PWM does is give out full blasts of 100% brightness at regular intervals to trick your eyes into thinking the screen is dimmer than it appears.  It means the LCD screen can’t actually dim the display and must resort to such b4stardly tricks, which really put strain on the eyes.

    So, plz contribute here devices known to have or have not PWM for their display.

    (Personally, I’d avoid PWM until a better technology gets massed produced, like AMOLED display.)

    #79377
    Eat Up
    Participant
    • Posts: 12

    Model:  Cube iWork8 Air

    Type:  8″ Cherry Trail tablet

    Display:  PWM LCD confirmed (avoid at all cost)

     

    #79378
    Eat Up
    Participant
    • Posts: 12

    Model:  Teclast Tbook 10 S

    Type:  10.1″ Cherry Trail tablet

    Display:  NO PWM (hurray!!!!)

    Note:  I don’t actually own this device, but presence/absence of PWM in the LCD was tested here (scroll down to the “Display” section):

    https://www.notebookcheck.net/Teclast-Tbook-10s-x5-Z8350-FHD-Convertible-Review.208580.0.html

    #79409
    Eat Up
    Participant
    • Posts: 12

    BTW, for anyone with a device with PWM display, what you can do is buy a sheet of self-adhesive 5% VLT tint.  Apply the tint over the screen, then increase the brightness to 100%.  Sure, the battery will drain faster, but sure beats having to look at a 100% bright screen every other millisecond while you’ve set the dimness to 25%…

    #79412
    Eat Up
    Participant
    • Posts: 12

    HOW TO TEST A DEVICE FOR PWM:

    Wave a pen or your hand over the screen at 25% or less brightness. If the resulting motion blur looks smooth, NO PWM.

    But if the motion blur looks like multiple repeating pattern, the LCD uses PWM to dim the screen.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar