Misaligned panel on ezbook 3 pro

Misaligned panel on ezbook 3 pro

TechTablets › Forums › Jumper Discussion › EZBook series › Misaligned panel on ezbook 3 pro

Tagged: 

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 3, 2017 at 12:36 pm #72946
    sipart
    Participant
    • Posts: 42

    Mine is the same (along with some light bleed on the screen which is only noticable while its boots on the Jumper screen). I wouldn’t touch it personally.

    I also get the screen surround being slightly pulled away in the top left (by the strong magnet I suspect) when I open the laptop – again minor issue – I just push it gently back in place. I am considering removing that magnet to solve the issue and make the laptop easier to open anyway.

    I think you have to consider the QC on this is not mainstream manufacturing standards – but then again not a mainstream price for this colection of components.

    October 3, 2017 at 1:35 pm #72949
    Kalle
    Participant
    • Posts: 110

    Alright, so then it’ts not just me at least. Yeah I mean it’s not an major issue really, just a little bit annoying. Was just thinking if someone has been able to fix it.

    October 3, 2017 at 2:18 pm #72955
    Anon
    Participant
    • Posts: 8

    Yeah, mine is also misaligned, albeit not as bad as yours. I pretty sure the light bleeding would not be there if they fitted the screen properly btw. The bleeding seems to be due to too much pressure on the panel.

    Really a shame, I wish they’d have at least a bit of quality control but I guess you pay what you get.

    October 3, 2017 at 5:39 pm #72961
    sportnok
    Participant
    • Posts: 151

    Cut the magnet in half or even a third.

    As for the light bleed, i can see it along the bottom of the screen, more obvious if you press lightly on the surround, but when using the screen day to day doesn’t show. Screen is set slightly high and to the left.

    October 3, 2017 at 6:02 pm #72962
    Carlo
    Participant
    • Posts: 13

    Same here, panel slightly misaligned in the same way. V4 with Samsung eMMC.

    This is not a big problem, but if someone knows how to fix this it would be great!

    October 3, 2017 at 7:20 pm #72966
    Kalle
    Participant
    • Posts: 110
    sportnok wrote:

    Cut the magnet in half or even a third. As for the light bleed, i can see it along the bottom of the screen, more obvious if you press lightly on the surround, but when using the screen day to day doesn’t show. Screen is set slightly high and to the left.

     

    I have already cut the magnet, not sure how that would affect the screen though.

    October 4, 2017 at 7:35 pm #73002
    sportnok
    Participant
    • Posts: 151

    Wasn’t suggesting the magnet would affect the screen, just make them smaller to hopefully make them a bit weaker.

    October 5, 2017 at 3:45 am #73043
    hunzhang
    Participant
    • Posts: 4

    My panel is misaligned too and unfortunately no samsung eMMC for me.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.

Lost Password

Skip to toolbar